GB/T 21492-2019 Active National standards

GB/T 21492-2019 Glass fiber reinforced plastics jacking pipes

GB/T 21492-2019 Glass fiber reinforced plastics jacking pipes

Publish Date: 2019-08-30 Implement Date: 2020-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 21492-2019

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Fiber-reinforced composites

ICS Name: Enhanced plastics

Publish Date: 2019-08-30

Implement Date: 2020-07-01

Pages: 33 pages

Scope

This standard specifies the terms and definitions, classification and marking, raw materials, requirements, test methods, inspection rules, marking, packaging, transportation, storage, factory certificates, and technical documents for fiberglass-reinforced plastic top pipes.
This standard applies to fiberglass-reinforced plastic top pipes (hereinafter referred to as GRP top pipes) used in the top-push construction method with a nominal diameter of 100 mm to 4,000 mm, a pressure rating of 0.1 MPa to 3.2 MPa, and a ring stiffness rating of 20,000 N/m2 and above. The maximum temperature of the medium shall not exceed 50℃.
GRP top pipes with nominal diameters and pressure ratings outside the scope of this standard may also be used as a reference.

Development Information

Word Count: 62 Thousand words Pages: 33 pages

Replace the following standards

GB/T 21492-2008 Glass fiber reinforced plastics jacking pipe

Referenced Standards

GB/T 1634.2-2004 Plastics—Determination of temperature of deflection under load—Part 2:Plastics,ebonite and long-fibre-reinforced composites GB/T 2573-2008 Test method for aging properties of glass fiber reinforced plastics ISO 8639:2016 ISO 10928:2016 GB/T 1447-2005 Fiber-reinforced plastics composites—Determination of tensile properties GB/T 1448-2005 Fiber-reinforced plastics composites—Determination of compressive properties GB/T 1458-1988 Test method for tensile strength of ring of filament-winding reinforced plastics GB/T 1458-2008 Test method for mechanical properties of ring of filament-winding reinforced plastics GB/T 1458-2023 Test method for mechanical properties of ring of filament-winding reinforced composites GB/T 2567-1995 The generals of test methods for properties of resin casting body GB/T 2567-2008 Test methods for properties of resin casting boby GB/T 2567-2021 Test methods for properties of resin casting body GB/T 2576-1989 Test method for insoluble matter content of resin used in fiber reinforced plastics GB/T 2576-2005 Test method for insoluble matter content of resin used in fiber reinforced plastics GB/T 2577-1989 Test method for resin content of glass fiber reinforced plastics GB/T 2577-2005 Test method for resin content of glass fiber reinforced plastics GB/T 3854-1983 Test method for hardness of fiber reinforced plastics by means of a Barcol impressor GB/T 3854-2005 Test method for hardness of reinforced plastics by means of a Barcol impresser GB/T 3854-2017 Test method for hardness of reinforced plasticsby means of a Barcol impresser GB/T 5349-1985 Test method for longitudinal tensile properties of fiber-reinforced thermosetting plastic pipe GB/T 5349-2005 Fiber-reinforced thermosetting plastic composites pipe—Determination of longitudinal tensile properties GB/T 5350-1985 Test method for longitudinal compressive properties of fiber-reinforced thermosetting plastic pipe GB/T 5350-2005 Fiber-reinforced thermosetting plastic composites pipe—Determination for longitudinal compressive properties GB/T 5351-1985 Test method for short-time hydraulic failure pressure of fiber-reinforced thermosetting plastic pipe GB/T 5351-2005 Fiber-reinforced thermosetting plastic composites pipe—Determination of short-time hydraulic failure pressure GB/T 5352-1985 Test method for external loading properties of fiber-reinforced thermosetting plastic pipe by parallel-plate loading GB/T 5352-2005 Fiber-reinforced thermosetting plastic composites pipe—Determination for external loading properties by parallel-plate loading GB/T 8237-1987 Liquid unsaturated polyester resin for glass fiber reinforced plastics GB/T 8237-2005 Liquid unsaturated polyester resin for fiber reinforced plastics GB/T 17470-1998 Glass fiber chopped strand mat GB/T 17470-2007 Glass fiber mats—Chopped strand and continuous filament mats GB/T 18369-2001 Glass fiber roving GB/T 18369-2008 Glass fiber roving GB/T 18369-2022 Glass fiber roving GB/T 18370-2001 Glass fibre woven roving GB/T 18370-2014 Glass fibre woven roving GB/T 21238-2007 Glass fiber reinforced plastics mortar pipes GB/T 21238-2016 Glass fiber reinforced plastics mortar pipes GB/T 32491-2016 Test method for long-term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings GB/T 8237-2025 Liquid unsaturated polyester resin for fiber reinforced plastics

Adopt standards

ISO 25780:2011

Related Standards

GB/T 2843-1981 Abolished

GB/T 2843-1981 The method of tempered glass impact test ( 227g steel ball test)

Publish Date: 1981-12-26

GB/T 3139-1982 Replaced

GB/T 3139-1982 Test method for thermal conductivity of glassfiber reinforced plastics

Publish Date: 1982-07-13

GB/T 3854-1983 Replaced

GB/T 3854-1983 Test method for hardness of fiber reinforced plastics by means of a Barcol impressor

Publish Date: 1983-09-14

GB/T 3855-1983 Replaced

GB/T 3855-1983 Test method for resin content of carbon fiber reinforced plastics

Publish Date: 1983-09-14

GB/T 3856-1983 Replaced

GB/T 3856-1983 Test method for compression properties of unidirectional fiber reinforced plastics

Publish Date: 1983-09-14

GB/T 6011-1985 Replaced

GB/T 6011-1985 Test method for flammability characteristics of fiber-reinforced plastics—Incandescent rod method

Publish Date: 1985-05-24