GB/T 5463.1-1985
Replaced
GB/T 33361-2016
Active
National standards
GB/T 33361-2016 Desulphurization injection lance of hot metal
GB/T 33361-2016 Desulphurization injection lance of hot metal
Basic Information
Standard Code:
GB/T 33361-2016
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Metallurgical auxiliary raw material minerals
ICS Name:
Non-metallic minerals
Publish Date:
2016-12-30
Implement Date:
2017-09-01
Pages:
7 pages
Scope
This standard specifies the terms and definitions, product grades, technical requirements, test methods, inspection rules, packaging, marking, transportation, storage, and quality certificates for molten iron desulfurization spray guns. This standard applies to spray guns used for molten iron pretreatment (hereinafter referred to as "spray guns"), and spray guns used for molten iron dephosphorization and desiliconization pretreatment can refer to this standard for guidance.
Development Information
Referenced Standards
YB/T 5200
GB/T 3001-2000 Shaped refractory products—Determination of modulus of rupture at ambient temperature
GB/T 3001-2007 Refractory products—Determination of modulus of rupture at ambient temperature
GB/T 3001-2017 Refractory products—Determination of modulus of rupture at ambient temperature
GB/T 5072-2008 Refractories—Determination of cold compressive strength
GB/T 5072-2023 Refractory products—Determination of cold compressive strength
GB/T 5072.1-1998 Dense, shaped refractory products—Determination of cold compressive strength—Part 1:Referee test without packing
GB/T 5072.2-2004 Dense shaped refractory products—Determination of cold compressive strength—Part 2:Test with packing
GB/T 5988-2004 Dense shaped refractory products—Determination of permanent changs in dimension on heating
GB/T 5988-2007 Refractory products—Determination of permanent change in dimension on heating
GB/T 5988-2022 Refractory products—Determination of permanent change in dimensions on heating
GB/T 6900-2006 Chemical analysis of alumina-silica refractories
GB/T 6900-2016 Chemical analysis of alumina-silica refractories
GB/T 6900.1-1986 Fireclay and high-alumina refractories—Determination of loss content on ignition—Gravimetric method
GB/T 6900.2-1986 Fireclay and high-alumina refractories—Determination of silicon dioxide content—Gravimetric-molybdenum blue photometric method
GB/T 6900.3-1986 Fireclay and high-alumina refractories—Determination of iron oxide content—o-Phenanthroline photometric method
GB/T 6900.4-1986 Fireclay and high-alumina refractories—Determination of aluminium oxide content—EDTA volumetric method
GB/T 6900.5-1986 Fireclay and high-alumina refractories—Determination of titanium dioxide content—Hydrogen peroxide photometric method
GB/T 6900.6-1986 Fireclay and high-alumina refractories—Determination of calcium oxide content—EDTA volumetric method
GB/T 6900.7-1986 Fireclay and high-alumina refractories—Determination of magnesium oxide content—Xylidyl blue Ⅰ-CTAB photometric method
GB/T 6900.8-1986 Fireclay and high-alumina refractories—Determination of calcium oxide and magnesium oxide content—Atomic absorption spectrophotometric method
GB/T 6900.9-1986 Fireclay and high-alumina refractories—Determination of potassium oxide and sodium oxide content—Atomic absorption spectrophotometric method
GB/T 6900.10-1986 Fireclay and high-alumina refractories—Determination of manganese oxide content—Ammonium persulfate photometric method
GB/T 6900.11-1986 Fireclay and high-alumina refractories—Determination of phosphorous pentoxide content—Molybdenum blue photometric method
GB/T 7322-1997 Test method for pyrometric cone equivalent(refractoriness) of refractories
GB/T 7322-2007 Refractory products—Determination of pyrometric cone equivalent (refractoriness)
GB/T 7322-2017 Refractory products—Determination of refractoriness
GB/T 10326-2001 Refractory products—Inspections of dimension appearance and section
GB/T 10326-2016 Shaped refractory products inspections of dimension, appearance and section
GB/T 21114-2007 Chemical analysis of refractory products by XRF—Fused cast bead method
GB/T 21114-2019 Refractories—Chemical analysis by X-ray fluorescence(XRF)—Fused cast-bead method
YB/T 5202.1-2003 Preparation of specimen for unshaped refractories Part 1:Refractory castables
GB/T 6900-2025 Chemical analysis of alumino-silicate refractories
Related Standards
GB/T 5463.2-1985
Replaced
GB/T 5463.2-1985 Technical terms of non-metallic mineral products—Talc
GB/T 5463.3-1986
Replaced
GB/T 5463.3-1986 Technical terms of non-metallic mineral products—Gypsum and anhydrite
GB/T 14505-1993
Replaced
GB/T 14505-1993 Method for chemical analysis of rocks and ores—General rules and regulations
GB/T 14506.10-1993
Replaced
GB/T 14506.10-1993 Silicate rocks—Determination of manganese oxide
GB/T 14506.11-1993
Replaced