GB/T 17457-1998
Replaced
GB/T 33383-2016
Replaced
National standards
GB/T 33383-2016 Technical specification for anti-corrosion on concrete/reinforced concrete structures using corrosion-resistant modified polyvinyl chloride (HFVC) structural adhesive and cement
GB/T 33383-2016 Technical specification for anti-corrosion on concrete/reinforced concrete structures using corrosion-resistant modified polyvinyl chloride (HFVC) structural adhesive and cement
Basic Information
Standard Code:
GB/T 33383-2016
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Material protection
ICS Name:
Other processing and plating
Publish Date:
2016-12-30
Implement Date:
2017-07-01
Pages:
20 pages
Scope
This standard specifies the terms and definitions, technical requirements, and data management for the corrosion-resistant modified polyvinyl chloride (HFVC) structural adhesives and putty for anti-corrosion protection.
This standard applies to the anti-corrosion protection of reinforced concrete (or concrete) surfaces in newly built, renovated, or expanded buildings and structures. It can also be used as a reference for the anti-corrosion protection of other equipment and steel structures.
Development Information
Superseded by the following standards
Referenced Standards
GB 50224-2010
GB/T 1410-2006 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
GB/T 1725-2007 Paints,varnishes and plastics—Determination of non-volatile-matter content
GB/T 1728-2020 Determination of drying time of coating and putty films
GB/T 1732-1993 Determination of impact resistance of film
GB/T 1732-2020 Determination of impact resistance of coating films
GB/T 1733-1993 Determination of resistance to water of films
GB/T 2567-1995 The generals of test methods for properties of resin casting body
GB/T 2567-2008 Test methods for properties of resin casting boby
GB/T 2567-2021 Test methods for properties of resin casting body
GB 3186-1982 Sampling paint products
GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes—Sampling
GB/T 6739-1996 Determination of film hardness by pencil test
GB/T 6739-2006 Paints and varnishes—Determination of film hardness by pencil test
GB/T 6739-2022 Paints and varnishes—Determination of film hardness by pencil test
GB/T 7124-1986 The method for determination of strength properties of adhesive in shear by tension loading(Metal to metal)
GB/T 7124-2008 Adhesives—Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
GB/T 9274-1988 Paints and varnishes—Determination of resistance to liquids
GB/T 9751.1-2008 Paints and varnishes—Determination of viscosity using rotary viscometers—Part1:Cone-and-plate viscometer operated at a high rate of shear
GB/T 17671-1999 Method of testing cements—Determination of strength
GB/T 17671-2021 Test method of cement mortar strength(ISO method)
JC/T 474-2008 Waterproofing agent for mortar and concrete
GB 50212-2014 Code for construction of building anticorrosive engineering
GB 50209-2010 Code for acceptance of construction quality of building ground
Related Standards
GB/T 17458-1998
Abolished
GB/T 17458-1998 Ductile iron pipes—Centrifugal cement mortar lining—Composition controls of freshly applied mortar
JG/T 133-2000
Abolished
JG/T 133-2000 Fluorocarbon coatings on architectural aluminum extrusions and panels
GB/T 17457-2009
Replaced
GB/T 17457-2009 Ductile iron pipes and fittings—Cement mortar lining
GA 923-2011
Active
GA 923-2011 Specification of special police vehicle unified appearance coating
GB/T 26825-2011
Active