GB/T 17457-1998
Replaced
GB/T 33383-2024
Active
National standards
GB/T 33383-2024 Corrosion control technology of modified polyvinyl chloride structural adhesive and cement
GB/T 33383-2024 Corrosion control technology of modified polyvinyl chloride structural adhesive and cement
Basic Information
Standard Code:
GB/T 33383-2024
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Material protection
ICS Name:
Other processing and plating
Publish Date:
2024-03-15
Implement Date:
2024-10-01
Pages:
18 pages
Scope
This document specifies the technical requirements and data management for the corrosion control of modified polyvinyl chloride structural adhesives and putty.
This document is applicable to the design and construction of waterproofing, anti-seepage, and anti-corrosion for the surfaces of reinforced concrete (or concrete) in new, renovated, and expanded buildings and structures. The anti-corrosion design and corrosion resistance operations for the surfaces of other equipment and steel structures can be used as a reference.
Development Information
Replace the following standards
Referenced Standards
GB/T 13452.2-2008 Paints and varnishes—Determination of film thickness
GB/T 16777-2008 Test methods for building waterproofing coatings
GB/T 31838.2-2019 Solid insulating materials—Dielectric and resistive properties—Part 2:Resistive properties(DC methods)—Volume resistance and volume resistivity
GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness)
GB/T 1725-2007 Paints,varnishes and plastics—Determination of non-volatile-matter content
GB/T 1728-2020 Determination of drying time of coating and putty films
GB/T 1732-1993 Determination of impact resistance of film
GB/T 1732-2020 Determination of impact resistance of coating films
GB/T 2567-1995 The generals of test methods for properties of resin casting body
GB/T 2567-2008 Test methods for properties of resin casting boby
GB/T 2567-2021 Test methods for properties of resin casting body
GB 3186-1982 Sampling paint products
GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes—Sampling
GB/T 7124-1986 The method for determination of strength properties of adhesive in shear by tension loading(Metal to metal)
GB/T 7124-2008 Adhesives—Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
GB/T 9274-1988 Paints and varnishes—Determination of resistance to liquids
GB/T 17671-1999 Method of testing cements—Determination of strength
GB/T 17671-2021 Test method of cement mortar strength(ISO method)
JC/T 474-2008 Waterproofing agent for mortar and concrete
GB 50212-2014 Code for construction of building anticorrosive engineering
GB 50108-2008 Technical Code for Waterproofing of Underground Works
GB 50209-2010 Code for acceptance of construction quality of building ground
GB/T 50224-2018 Code for acceptance of construction quality of anticorrosive engineering of buildings
Related Standards
GB/T 17458-1998
Abolished
GB/T 17458-1998 Ductile iron pipes—Centrifugal cement mortar lining—Composition controls of freshly applied mortar
JG/T 133-2000
Abolished
JG/T 133-2000 Fluorocarbon coatings on architectural aluminum extrusions and panels
GB/T 17457-2009
Replaced
GB/T 17457-2009 Ductile iron pipes and fittings—Cement mortar lining
GA 923-2011
Active
GA 923-2011 Specification of special police vehicle unified appearance coating
GB/T 26825-2011
Active