GB/T 37997-2019 Thermoplastic multi-layer(non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons,solvents and chemicals—Specification
GB/T 37997-2019 Thermoplastic multi-layer(non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons,solvents and chemicals—Specification
Basic Information
Scope
This standard specifies the requirements for multi-layer thermoplastic (non-vulcanized) hoses and hose assemblies used for conveying hydrocarbons, solvents, and chemicals, with a nominal inner diameter of 25 mm to 300 mm, a working pressure of 0.4 MPa to 2.5 MPa, and a working temperature range of -30 ℃ to +150 ℃ in eight types.
Type 1 hoses are suitable for conveying gases;
Types 2 to 8 hoses are suitable for conveying liquid substances.
Note 1: For the selection of materials for the inner lining and the coating layer of the metal wire in hoses and/or hose assemblies used for conveying chemicals, please refer to Appendix A.
Note 2: When considering the use of hoses with polymer-coated metal wires for conveying low-conductivity hydrocarbons and chemicals, it is best to consult the manufacturer.
This standard does not apply to hoses and hose assemblies used for the following purposes:
—— Aircraft refueling (see GB/T 10543);
—— Fuel distribution (see HG/T 3037);
—— Oil burners (see GB/T 24146);
—— Liquefied petroleum gas and liquefied natural gas (see ISO 27127);
—— Fire fighting (see GB/T 24144);
—— Offshore liquefied natural gas (see EN 1474-2);
—— Refrigeration pipelines.