GB/T 1149.5-2008 Active National standards

GB/T 1149.5-2008 Internal combustion engines—Piston rings—Part 5:Inspection measuring principles

GB/T 1149.5-2008 Internal combustion engines—Piston rings—Part 5:Inspection measuring principles

Publish Date: 2008-08-11 Implement Date: 2009-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 1149.5-2008

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: The body and moving parts

ICS Name: Internal combustion engine

Publish Date: 2008-08-11

Implement Date: 2009-02-01

Pages: 23 pages

Scope

This part of GB/T 1149 specifies the inspection methods for piston rings. This part is applicable to piston rings for reciprocating internal combustion engines with a cylinder diameter of less than or equal to 200 mm and compressors operating under similar conditions.

Development Information

Word Count: 40 Thousand words Pages: 23 pages

Same series standard

GB/T 1149.1-2008 Internal combustion engines—Piston rings—Part 1:General specifications GB/T 1149.4-2008 Internal combustion engines—Piston rings—Part 4:Quality requirements GB/T 1149.6-2008 Internal combustion engines—Piston rings—Part 6:Scraper rings made of cast iron GB/T 1149.8-2008 Internal combustion engines—Piston rings—Part 8:Rectangular rings made of steel GB/T 1149.9-2008 Internal combustion engines—Piston rings—Part 9:Keystone rings made of cast iron GB/T 1149.13-2008 Internal combustion engines—Piston rings—Part 13:Oil control rings GB/T 1149.14-2008 Internal combustion engines—Piston rings—Part 14:Coil-spring-loaded oil control rings

Replace the following standards

GB/T 1149.6-1994 Internal combustion engines—Piston rings—Inspection measuring principles

Referenced Standards

GB/T 4340.3-1999 Metallic vickers hardness test—Part 3:Calibration of hardness reference blocks ISO 6621-1:2007 ISO 4287-1:1984 GB/T 3505-2000 Geometrical product specifications (GPS)—Surface texture:Profile method—Terms, definitions and surface texture parameters GB/T 3505-2009 Geometrical Product Specifications (GPS)—Surface texture:Profile method—Terms,definitions and surface texture parameters

Adopt standards

ISO 6621-2:2003

Related Standards

GB/T 3821-1983 Replaced

GB/T 3821-1983 Determination of cleanliness for small and medium power internal combustion engines

Publish Date: 1983-08-09

GB/T 1147-1987 Replaced

GB/T 1147-1987 Reciprocating internal combustion engines—General technical specifications

Publish Date: 1987-01-12

GB/T 725-1991 Replaced

GB/T 725-1991 Internal combustion engines—Nomenclature and code of designations

Publish Date: 1991-03-22

GB/T 1149.3-1992 Replaced

GB/T 1149.3-1992 Internal combustion engines—Piston rings-Scraper rings

Publish Date: 1992-11-14

GB/T 1149.5-1992 Replaced

GB/T 1149.5-1992 Internal combustion engines—Piston rings-Oil control rings

Publish Date: 1992-11-14

GB/T 1151-1993 Replaced

GB/T 1151-1993 Internal combustion engines—Main and connecting rod bearings—Specification

Publish Date: 1993-03-03