GB/T 38347-2019 Hot-rolled wire rod of ultra-low carbon steel with high boron

GB/T 14981-2009 Dimension,shape,mass and tolerance for hot-rolled round wire rod GB/T 222-1984 Method of sampling steel for determination of chemical composition and permissible variations for product analysis GB/T 222-2006 Permissible tolerances for chemical composition of steel products GB/T 223.4-1988 Methods for chemical analysis of iron, steel and alloy The volumetric method for determination of manganese content by ammonium nitrate oxidation GB/T 223.4-2008 Alloyed steel—Determination of manganese content—Potentiometric or visual titration method GB/T 223.5-1997 Methods for chemical analysis of iron,steel and alloy—The reduced molybdosilicate spectro photometric method for the determination of acid-soluble silicon content GB/T 223.5-2008 Steel and iron—Determination of acid-soluble silicon and total silicon content—Reduced molybdosilicate spectrophotometric method GB/T 223.9-2000 Methods for chemical analysis of iron,steel and alloy The chrom azurol S photometric method for the determination of aluminium content GB/T 223.9-2008 Iron,steel and alloy—Determination of aluminium content—Chrome azurol S photometric method GB/T 223.11-1991 Methods for chemical analysis of iron, steel and alloy The ammonium persulfate oxidation volumetric method for the determination of chromium content GB/T 223.11-2008 Iron,steel and alloy—Determination of chromium content—Visual titration or potentiometric titration method GB/T 223.37-1989 Methods for chemical analysis of iron, steel and alloy The indophenol blue photometric method for the determination of nitrogen content after distillation separation GB/T 223.37-2020 Iron,steel and alloy—Determination of nitrogen content—Indophenol blue spectrophotometric method after distillation separation GB/T 223.59-2008 Iron,steel and alloy—Determination of phosphorus content—Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method GB/T 223.63-1988 Methods for chemical analysis of iron,steel and alloy—The sodium(potassium)periodate photometric method for the determination of manganese content GB/T 223.63-2022 Iron,steel and alloy—Determination of manganese content—Sodium(potassium) periodate spectrophotometric method GB/T 223.64-1988 Methods for chemical analysis of iron,steel and alloy—The flame atomic absorption spectrometric method forthe determination of manganese content GB/T 223.64-2008 Iron,steel and alloy—Determination of manganese content—Flame atomic absorption spectrometric method GB/T 223.67-1989 Methods for chemical analysis of iron, steel and alloy—The reducing distillation-methylene blue photometric method for the determination of sulfur content GB/T 223.67-2008 Iron,steel and alloy—Determination of sulfur content—Methylene blue spectrophotometric method GB/T 223.71-1997 Methods for chemical analysis of iron,steel and alloy—The gravimetric method after combustion in the pipe furnace for the determination of carbon content GB/T 223.74-1997 Methods for chemical analysis of iron,steel and alloy—The combustion gravimetric/gas-volumetric method for the determination of combined carbon content GB/T 223.75-1991 Methods for chemical analysis of iron, steel and alloy—The methanol distillation-curcumin photometric method for the determination of boron content GB/T 223.75-2008 Iron,steel and alloy—Determination of boron content—Methanol distillation-curcumin photometric method GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 2101-1989 General requirements of acceptance, packaging, marking and certification for section steel GB/T 2101-2008 General requirement of acceptance,packaging,marking,and certification for section steel GB/T 2101-2017 General requirement of acceptance,packaging,marking and certification for section steel GB/T 2975-1998 Steel and steel products—Location and preparation of test pieces for mechanical testing GB/T 2975-2018 Steel and steel products—Location and preparation of samples and test pieces for mechanical testing GB/T 4336-2002 Standard test method for spark discharge atomic emission spectrometric analysis of carbon and low-Alloy steel(routine method) GB/T 4336-2016 Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method) GB/T 10561-1989 Steel—Determination of content of non-metallic inclusion—Micrographic method using standard diagrams GB/T 10561-2005 Steel—Determination of content of nonmetallic inclusions—Micrographic method using standards diagrams GB/T 10561-2023 Determination of content of nonmetallic inclusions in steel—Micrographic method using standard diagrams GB/T 13298-1991 Metal—Inspection method of microstructure GB/T 13298-2015 Inspection methods of microstructure for metals GB/T 17505-1998 Steel and steel products General technical delivery requirements GB/T 17505-2016 Steel and steel products—General technical delivery requirements GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition GB/T 20123-2006 Steel and iron—Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method) GB/T 20124-2006 Steel and iron—Determination of nitrogen content—Thermal conductimetric method after fusion in a current of inert gas (Routine method) GB/T 20125-2006 Low-alloy steel—Determination of multi-element contents—Inductively coupled plasma atomic emission spectrometric method GB/T 20126-2006 Unalloyed Steel—Determination of low carbon content—Part 2:Infrared absorption method after combustion in an induction furnace(With preheating) GB/T 22368-2008 Low-alloy steel—Determination of multi-element contents—Glow discharge optical emission spectrometry(Routine method) YB/T 081-1996 Rule for rounding off of numberical values and judgement of testing values for technical standards of metallurgy YB/T 081-2013 Metallurgical technology standards for numerical rounding and determination of testing values GB/T 222-2025 Steels and alloys—Permissible deviations of product analyzed chemical composition GB/T 223.11-2025 Iron, steel and alloy—Determination of chromium content—Titrimetric method and spectrophotometric method