GB/T 1222-1984
Replaced
GB/T 223.4-2008
Active
National standards
GB/T 223.4-2008 Alloyed steel—Determination of manganese content—Potentiometric or visual titration method
GB/T 223.4-2008 Alloyed steel—Determination of manganese content—Potentiometric or visual titration method
Basic Information
Standard Code:
GB/T 223.4-2008
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Analysis methods for steel and iron alloys
ICS Name:
\nSteel
Publish Date:
2008-05-30
Implement Date:
2008-12-01
Pages:
9 pages
Scope
This section specifies the determination of manganese content by potentiometric titration or visual titration. This section is applicable to the determination of manganese content in alloy steel with a mass fraction of 2% to 25%. Vanadium and cerium interfere with the determination results. If the cerium content in the sample is less than 0.01% or the vanadium content is less than 0.005%, the interference can be ignored. If the cerium content in the sample is greater than 0.01% or the vanadium content is greater than 0.005%, the theoretical value can be corrected.
Development Information
Same series standard
GB/T 223.5-2008 Steel and iron—Determination of acid-soluble silicon and total silicon content—Reduced molybdosilicate spectrophotometric method
GB/T 223.9-2008 Iron,steel and alloy—Determination of aluminium content—Chrome azurol S photometric method
GB/T 223.11-2008 Iron,steel and alloy—Determination of chromium content—Visual titration or potentiometric titration method
GB/T 223.23-2008 Iron,steel and alloy—Determination of nickel content—The dimethylglyoxime spectrophotometric method
GB/T 223.26-2008 Iron,steel and alloy—Determination of molybdenum content—The thiocyanate spectrophotometric method
GB/T 223.29-2008 Iron,steel and alloy—Determination of lead content—Carrier precipitation-xylenol orange spectrophotometric method
GB/T 223.31-2008 Iron,steel and alloy—Determination of arsenic content—Distillation-molybdenum blue spectrophotometric method
GB/T 223.43-2008 Iron,steel and alloy—Determination of tungsten content—Gravimetric method and spectrophotometric method
GB/T 223.55-2008 Iron,steel and alloy—Determination of tellurium content—Oscillo-polarographic method
GB/T 223.59-2008 Iron,steel and alloy—Determination of phosphorus content—Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
GB/T 223.64-2008 Iron,steel and alloy—Determination of manganese content—Flame atomic absorption spectrometric method
GB/T 223.67-2008 Iron,steel and alloy—Determination of sulfur content—Methylene blue spectrophotometric method
GB/T 223.69-2008 Iron,steel and alloy—Determination of carbon contents—Gas-volumetric method after combustion in the pipe furnace
GB/T 223.70-2008 Iron,steel and alloy—Determination of iron contents—o-Phenanthroline spectrophotometric method
GB/T 223.72-2008 Iron,steel and alloy—Determination of sulfur content—Gravimetric method
GB/T 223.73-2008 Iron,steel and alloy—Determination of iron contents—Titanium trichloride-potassium dichromate titration method
GB/T 223.75-2008 Iron,steel and alloy—Determination of boron content—Methanol distillation-curcumin photometric method
Replace the following standards
Referenced Standards
ISO 385-1
ISO 648
ISO 1042
ISO 3696
ISO 4942
ISO 4947
ISO 5725-3
ISO 9647
GB/T 6379.1-2004 Accuracy(trueness and precision)of measurement methods and results—Part 1:General principles and definitions
GB/T 6379.2-2004 Accuracy(trueness and precision)of measurement methods and results—Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition
Related Standards
GB/T 222-1984
Replaced
GB/T 222-1984 Method of sampling steel for determination of chemical composition and permissible variations for product analysis
GB/T 5216-1985
Replaced
GB/T 5216-1985 Technical requirements for structural steel with specified hardenability bands
GB/T 8731-1988
Replaced
GB/T 8731-1988 Free-cutting steel—Technical requirements
GB/T 8732-1988
Replaced
GB/T 8732-1988 Steels for vane of steam turbine
GB/T 10560-1989
Replaced