中文 English
GB 18242-2008 Replaced National standards force_standard

GB 18242-2008 Styrene butadiene styrene(SBS) modified bituminous sheet materials

GB 18242-2008 Styrene butadiene styrene(SBS) modified bituminous sheet materials

Publish Date: 2008-09-18 Implement Date: 2009-09-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB 18242-2008
Standard Type: National standards
Standard Status: Replaced
is_force_gb: yes
CCS Name: Roofing and paving waterproofing and moistureproof materials
ICS Name: Waterproof
Publish Date: 2008-09-18
Implement Date: 2009-09-01
Pages: 16 pages

Scope

This standard specifies the classification and marking, raw materials, requirements, test methods, inspection rules, marking, packaging, storage, and transportation of elastomer-modified bituminous waterproofing membranes (referred to as SBS waterproofing membranes). This standard applies to waterproofing membranes made with polyester felt, fiberglass felt, or fiberglass-reinforced polyester felt as the base material, and styrene-butadiene-styrene (SBS) thermoplastic elastomers as the petroleum bitumen modifier, with isolation materials applied on both sides.

Development Information

Word Count: 19 Thousand words Pages: 16 pages

Replace the following standards

GB 18242-2000 Styrene butadiene styrene(SBS)modified bituminous sheet materials

Superseded by the following standards

GB/T 18242-2025 Styrene butadiene styrene/Atactic polypropylene modified bituminous waterproofing sheets

Referenced Standards

GB/T 328.10-2007 Test methods for building sheets for waterproofing—Part 10:Bitumen,plastic and rubber sheets for waterproofing-watertightness GB/T 328.11-2007 Test methods for building sheets for waterproofing—Part 11:Bitumen sheets for waterproofing-flow resistance at elevated temperature GB/T 328.17-2007 Test methods for building sheets for waterproofing—Part 17:Bitumen sheets for waterproofing-adhesion of granules JC/T 905 GB/T 328.2-1989 Test methods for asphalt waterproof roll roofing—Saturated and coated bitumen amount of asphalt GB/T 328.2-2007 Test methods for building sheets for waterproofing—Part 2:Bitumen sheets for waterproofing-visible defects GB/T 328.4-1989 Test methods for asphalt waterproof roll roofing—Water absorption of asphalt GB/T 328.4-2007 Test methods for building sheets for waterproofing—Part 4:Bitumen sheets for waterproofing-thickness and mass per unit area GB/T 328.6-1989 Test methods for asphalt waterproof roll roofing—Tensile strength of asphalt GB/T 328.6-2007 Test methods for building sheets for waterproofing—Part 6:Bitumen sheets for waterproofing-length, width and straightness GB/T 328.8-2007 Test methods for building sheets for waterproofing—Part 8:Bitumen sheets for waterproofing-tensile properties GB/T 328.14-2007 Test methods for building sheets for waterproofing—Part 14:Bitumen sheets for waterproofing-flexibility at low temperature GB/T 328.18-2007 Test methods for building sheets for waterproofing—Part 18:Bitumen sheets for waterproofing-resistance to tearing(nail shank) GB/T 328.20-2007 Test methods for building sheets for waterproofing—Part 20:Bitumen sheets for waterproofing-resistance to peeling of joints GB/T 328.26-2007 Test methods for building sheets for waterproofing—Part 26:Bitumen sheets for waterproofing-dissoulble composite of membrane(impregnated and coated asphalt amount) GB/T 18244-2000 Test methods for resistance to weathering of building water proofing materials GB/T 18244-2022 Test methods for weathering resistance of building waterproof materials GB/T 18840-2002 Padding for bituminous waterproof sheets GB/T 18840-2018 Inlay for bituminous waterproof sheets

Adopt standards

EN 13707-2004

Related Standards

GB/T 18244-2000 Replaced

GB/T 18244-2000 Test methods for resistance to weathering of building water proofing materials

Publish Date: 2000-10-27
GB/T 19889.7-2005 Replaced

GB/T 19889.7-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 7:Field measurements of impact sound insulation of floors

Publish Date: 2005-07-29
GB/T 19889.1-2005 Active

GB/T 19889.1-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 1:Requirements for laboratory test facilities with suppressed flanking transmission

Publish Date: 2005-09-09
GB/T 19889.2-2005 Abolished

GB/T 19889.2-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 2:Determination,verification and application of precision data

Publish Date: 2005-09-09
GB/T 19889.3-2005 Replaced

GB/T 19889.3-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 3:Laboratory measurements of airborne sound insulation of building elements

Publish Date: 2005-09-09
GB/T 19889.4-2005 Active

GB/T 19889.4-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 4:Field measurements of airborne sound insulation between rooms

Publish Date: 2005-09-09
Contact Us