GB/T 2521-1996
Replaced
GB/T 2521.2-2025
Active
National standards
GB/T 2521.2-2025 Cold-rolled electrical steel delivered in the fully-processed state—Part 2:Grain-oriented steel strip(sheet)
GB/T 2521.2-2025 Cold-rolled electrical steel delivered in the fully-processed state—Part 2:Grain-oriented steel strip(sheet)
Price:
$ 75
Basic Information
Standard Code:
GB/T 2521.2-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electrician's steel
ICS Name:
Special magnetic steel
Publish Date:
2025-08-29
Implement Date:
2026-03-01
Pages:
24 pages
Scope
This document specifies the classification, symbols and grades, general requirements, technical requirements, inspection and testing, determination and re-inspection rules, packaging, marking, and quality certificates, and order content for cold-rolled grain-oriented electrical steel strips (sheets) with a nominal thickness of 0.18 mm, 0.20 mm, 0.23 mm, 0.27 mm, 0.30 mm, and 0.35 mm, which are coated with insulating layers on both sides.
This document applies to cold-rolled grain-oriented electrical steel strips (sheets) supplied in a fully processed state and used in magnetic circuit structures (hereinafter referred to as "steel strips (sheets)").
Development Information
Replace the following standards
Referenced Standards
GB/T 247-1997 General rule of acceptance, package, mark and certification for steel plates(sheets) and strips
GB/T 247-2008 General rule of package,mark and certification for steel plates(sheets)and strips
GB/T 247-2025 General rules of package, mark and certification for steel plate, sheet and strip
GB/T 2522-1988 Magnetic sheet and strip—Methods of measurement of interlamination resistance and lamination factor and coat adhesiveness
GB/T 2522-2007 Methods of test for the determination of surface insulation resistance and lamination factor of electric sheet and strip
GB/T 2522-2017 Methods of test for the determination of coating insulation resistance and coating adhesion of electrical strip and sheet
GB/T 2900.60-2002 Electrotechnical terminology—Electromagnetism
GB/T 3655-2000 Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame
GB/T 3655-2008 Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame
GB/T 3655-2022 Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an epstein frame
GB/T 9637-2001 Electrotechnical terminology— Magnetic materials and components
GB/T 13789-2022 Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
GB/T 17505-1998 Steel and steel products General technical delivery requirements
GB/T 17505-2016 Steel and steel products—General technical delivery requirements
GB/T 18253-2000 Steel and steel products—Types of inspection documents
GB/T 18253-2018 Steel and steel products—Types of inspection documents
GB/T 19289-2003 Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
GB/T 19289-2019 Methods of measurement of resistivity,density and stacking factor of electrical steel strip and sheet
YB/T 4292-2012 The geometric characteristics testing method for electrical steel strip (sheet) is provided
YB/T 4731-2019 The method of repeated bending test for electrical steel strips
Adopt standards
IEC 60404-8-7:2020
Related Standards
GB/T 17951.2-2002
Replaced
GB/T 17951.2-2002 Cold-rolled grain non-oriented electrical steel strip (sheet) delivered in the semi-processed state
GB/T 19345-2003
Replaced
GB/T 19345-2003 Amorphous and nanocrystalline soft magnetic alloy strips
GB/T 911-2004
Replaced
GB/T 911-2004 Dimensions,shapes,weight and tolerances for hot-rolled tool flat steels
GB/T 2521-2008
Active
GB/T 2521-2008 Cold-rolled grain-oriented and non-oriented electrical steel strip(sheet)
GB/T 6983-2008
Replaced