GB 13539.4-1992
Replaced
GB/T 15166.2-2008
Replaced
National standards
GB/T 15166.2-2008 High-voltage alternating-current fuses—Part 2:Current-limiting fuses
GB/T 15166.2-2008 High-voltage alternating-current fuses—Part 2:Current-limiting fuses
Basic Information
Standard Code:
GB/T 15166.2-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
High-voltage switchgear
ICS Name:
Fuses and other overload protection devices
Publish Date:
2008-09-24
Implement Date:
2009-08-01
Pages:
63 pages
Scope
This part applies to all types of high-voltage current-limiting fuses used indoors and outdoors in AC power systems with a nominal voltage of 3 kV and above and a frequency of 50 Hz.
Some fuses are equipped with indicating devices or impactors. These fuses fall within the scope of this part, but the correct operation of the impactors in combination with the trip mechanisms of the switch devices is not within the scope of this part. For details, please refer to GB 16926.
Development Information
Same series standard
GB/T 15166.3-2008 High-voltage alternating-current fuses—Part 3:Expulsion fuses
GB/T 15166.4-2008 High-voltage alternating-current fuses—Part 4:Fuses for external protection of shunt power capacitors
GB/T 15166.5-2008 High-voltage alternating-current fuses—Part 5:Specification for high-voltage fuse-links for motor circuit applications
GB/T 15166.6-2008 High-voltage alternating-current fuses—Part 6:Application guide for the selection of fuse-links of high-voltage fuses for transformer circuit applications
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 1843-1996 Plastics—Determination of izod impact strength
GB 1984-2003 High-voltage alternating-current circuit-breakers
GB/T 2900.19-1994 Electrotechnical terminology High-voltage test technique and insulation co-ordination
GB/T 3804-2004 High-voltage alternating-current switches for rated voltage above 3.6 kV and less than 40.5 kV
GB/T 3808-2002 Verification of pendulum-type impact testing machines(ISO 148-2:1998,Metallic materials—Charpy pendulum impact test—Part 2:Verification of test machines, MOD)
GB/T 5582-1993 External insulation pollution classes of high-voltage electric power equipments
GB/T 11021-2007 Electrical insulation—Thermal classification
GB/T 11022-1999 Common specifications for high-voltage switchgear and control gear standards
GB/T 15166.4-2008 High-voltage alternating-current fuses—Part 4:Fuses for external protection of shunt power capacitors
GB/T 15166.5-2008 High-voltage alternating-current fuses—Part 5:Specification for high-voltage fuse-links for motor circuit applications
GB/T 15166.6-2008 High-voltage alternating-current fuses—Part 6:Application guide for the selection of fuse-links of high-voltage fuses for transformer circuit applications
GB 16926-1997 High—voltage alternating current switch-fuse combinations
GB/T 16927.1-1997 High-voltage test techniques Part 1:General test requirements
GB/T 15166.1-1994 Alternating-current high-voltage fuses Terminology
GB/T 15166.1-2019 High-voltage alternating-current fuses—Part 1:Terminology
Adopt standards
IEC 60282-1:2005
Related Standards
GB 13955-1992
Replaced
GB 13955-1992 Installation and operation of residual current operated protective devices
GB 14285-1993
Replaced
GB 14285-1993 Technical code for relaying protection and security automatic equipment
GB 14287-1993
Replaced
GB 14287-1993 Residual current operated alarm devices for fire prevention
GB 15166.2-1994
Replaced
GB 15166.2-1994 Alternating-current high-voltage fuses Current-limiting fuses
GB 15166.3-1994
Replaced