GB 13539.4-1992
Replaced
GB/T 15166.3-2008
Replaced
National standards
GB/T 15166.3-2008 High-voltage alternating-current fuses—Part 3:Expulsion fuses
GB/T 15166.3-2008 High-voltage alternating-current fuses—Part 3:Expulsion fuses
Basic Information
Standard Code:
GB/T 15166.3-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
High-voltage switchgear
ICS Name:
Fuses and other overload protection devices
Publish Date:
2008-09-24
Implement Date:
2009-08-01
Pages:
38 pages
Scope
This part applies to indoor or outdoor injection-type fuses in AC power systems with a nominal voltage of 3 kV or higher and a frequency of 50 Hz. According to different transient recovery voltages (TRV), injection-type fuses are divided into Class A, Class B, and Class C. This part only deals with the performance of fuses. Each fuse is composed of a fuse base, a fuse carrier, and a fuse element that have passed the tests specified in this part. The performance of other combinations is not included in this part. This part also applies to non-injection-type fuses that naturally open at the zero point of current.
Development Information
Same series standard
GB/T 15166.2-2008 High-voltage alternating-current fuses—Part 2:Current-limiting fuses
GB/T 15166.4-2008 High-voltage alternating-current fuses—Part 4:Fuses for external protection of shunt power capacitors
GB/T 15166.5-2008 High-voltage alternating-current fuses—Part 5:Specification for high-voltage fuse-links for motor circuit applications
GB/T 15166.6-2008 High-voltage alternating-current fuses—Part 6:Application guide for the selection of fuse-links of high-voltage fuses for transformer circuit applications
Replace the following standards
Superseded by the following standards
Referenced Standards
GB 311.1-1997 Insulation co-ordination for high voltage transmission and distribution equipment
GB 1984-2003 High-voltage alternating-current circuit-breakers
GB 1985-2004 High-voltage alternating-current disconnectors and earthing switches
GB/T 2900.20-1994 Electrotechnical terminology—High-voltage switchgear
GB/T 3804-2004 High-voltage alternating-current switches for rated voltage above 3.6 kV and less than 40.5 kV
GB/T 4585-2004 Artificial pollution tests on high-voltage insulators to be used on a.c systems
GB/T 5582-1993 External insulation pollution classes of high-voltage electric power equipments
GB/T 11021-2007 Electrical insulation—Thermal classification
GB/T 11022-1999 Common specifications for high-voltage switchgear and control gear standards
GB/T 15166.1-1994 Alternating-current high-voltage fuses Terminology
GB/T 15166.4-2008 High-voltage alternating-current fuses—Part 4:Fuses for external protection of shunt power capacitors
GB/T 15166.6-2008 High-voltage alternating-current fuses—Part 6:Application guide for the selection of fuse-links of high-voltage fuses for transformer circuit applications
GB/T 16927.1-1997 High-voltage test techniques Part 1:General test requirements
Adopt standards
IEC 60282-2:1995
Related Standards
GB 13955-1992
Replaced
GB 13955-1992 Installation and operation of residual current operated protective devices
GB 14285-1993
Replaced
GB 14285-1993 Technical code for relaying protection and security automatic equipment
GB 14287-1993
Replaced
GB 14287-1993 Residual current operated alarm devices for fire prevention
GB 15166.2-1994
Replaced
GB 15166.2-1994 Alternating-current high-voltage fuses Current-limiting fuses
GB 15166.3-1994
Replaced