GB/T 959.1-2017 Active National standards

GB/T 959.1-2017 Specifications for retaining rings—Circlips

GB/T 959.1-2017 Specifications for retaining rings—Circlips

Publish Date: 2017-07-12 Implement Date: 2018-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 959.1-2017

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Fasteners

ICS Name: Gaskets, locking parts

Publish Date: 2017-07-12

Implement Date: 2018-02-01

Pages: 9 pages

Scope

This part of GB/T 959 specifies the technical requirements for hole-type, shaft-type, and open-type elastic retaining rings. This part is applicable to hole-type, shaft-type, and open-type elastic retaining rings specified in national standards. Other standard and non-standard elastic retaining ring products can also be used.

Development Information

Word Count: 18 Thousand words Pages: 9 pages

Replace the following standards

GB/T 959.1-1986

Referenced Standards

GB/T 90.1-2002 Fasteners—Acceptance inspection GB/T 90.1-2023 Fasteners—Acceptance inspection GB/T 90.2-2002 Fasteners—Marking and packaging GB/T 1222-1984 Spring steel GB/T 1222-2007 Spring steels GB/T 1222-2016 Spring steels GB/T 4357-1989 Carbon spring steel wires GB/T 4357-2009 Cold-drawn non-alloy steel wire for springs GB/T 4357-2022 Cold-drawn unalloyed steel wire for springs GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests GB/T 11376-1997 Phosphate conversion coatings for metals GB/T 11376-2020 Metallic and other inorganic coatings—Phosphate conversion coating of metals JB/T 3411.47-1999 Axial-use elastic retaining ring with installation pliers, size JB/T 3411.48-1999 Insertion pliers for elastic split ring retainers, dimensions GB/T 1222-2025 Spring steels

Related Standards

GB/T 878-1986 Replaced

GB/T 878-1986 Parallel pins with external thread

Publish Date: 1986-07-02

GB/T 94.1-1987 Replaced

GB/T 94.1-1987 Specifications for spring washers—Single coil spring lock washers

Publish Date: 1987-02-05

GB/T 94.3-1987 Replaced

GB/T 94.3-1987 Specifications for spring washers—Curved and wave spring washers

Publish Date: 1987-02-05

GB/T 854-1988 Active

GB/T 854-1988 Tab washers with long tab

Publish Date: 1988-01-06

GB/T 1230-1991 Replaced

GB/T 1230-1991 High strength plain washers for steel structures

Publish Date: 1991-04-22

GB/T 3103.3-2000 Replaced

GB/T 3103.3-2000 Tolerances for fasteners—Plain washers

Publish Date: 2000-09-26