GB/T 26697-2011 Active National standards

GB/T 26697-2011 Low-frequency square wave electronic ballasts for metal halide lamps

Publish Date: 2011-06-16 Implement Date: 2011-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 26697-2011

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Lighting fixtures and accessories

ICS Name: Other standards related to lighting

Publish Date: 2011-06-16

Implement Date: 2011-12-01

Pages: 14 pages

Scope

This standard provides the performance requirements and operating characteristics of low-frequency square-wave electronic ballasts for metal halide lamps. The operating power frequency of the electronic ballast is 50 Hz, and the maximum power voltage is 250 V. The output frequency of the electronic ballast can be set to frequencies other than 50 Hz. The operating current frequency of the lamps covered by this standard ranges from 50 Hz to 400 Hz (applicable to certain individual frequency ranges), and the metal halide lamps used with them should comply with the requirements of GB/T 18661 and IEC 61167. A square-wave electronic ballast is defined as an electronic ballast whose lamp operating current waveform is essentially a square wave and meets the rise/fall time requirements specified in clause 5.4.4.1 of this standard.

Development Information

Word Count: 23 Thousand words Pages: 14 pages

Referenced Standards

GB 7000.1-2007 Luminaires—Part 1:General requirements and tests GB/T 15042-2008 Auxiliaries for lamps—Ballasts for discharge lamps(excluding tubular fluorescent lamps)—Performance requirements IEC 61167 GB 17625.1-2003 Electromagnetic compatibility—limits—Limits—for harmonic current emissions(equipment input current≤16A per phase GB 17625.1-2012 Electromagnetic compatibility—Limits—Limits for harmonic current emissions(equipment input current ≤16 A per phase) GB 17625.1-2022 Electromagnetic compatibility—Limits—Part 1:Limits for harmonic current emissions(equipment input current ≤16 A per phase) GB 17625.2-1999 Electromagnetic compatibility Limits Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current≤16A GB/T 17625.2-2007 Electromagnetic compatibility (EMC)—Limits—Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection GB 17743-1999 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment GB/T 17743-2007 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment GB/T 17743-2017 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment GB/T 17743-2021 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment GB/T 18595-2001 Equipment for general lighting purposes—EMC immunity requirements GB/T 18595-2014 Equipment for general lighting purposes—EMC immunity requirements GB 18661-2002 Single-end metal-halide lamps(175W～1500W Scl3-Nal Series lamps) GB/T 18661-2008 Metal-halide lamps(ScI3-NaI series) GB/T 18661-2020 Metal-halide lamp(ScI3-NaI series)—Performance requirements GB 19510.13-2007 Lamp controlgear—Part 13:Particular requirements for d.c.or a.c.supplied electronic ballasts for discharge lamps(excluding fluorescent lamps)

Adopt standards

ANSI_ANSLG C82.14-2006

Related Standards

GB 19510.10-2004 Replaced

GB 19510.10-2004 Lamp control gear—Part 10:Particular requirements for ballasts for discharge lamps(excluding fluorescent lamps)

Publish Date: 2004-05-10

GB 19510.11-2004 Replaced

GB 19510.11-2004 Lamp controlgear—Part 11:Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps(neon tubes)

Publish Date: 2004-05-10

GB 19510.1-2004 Replaced

GB 19510.1-2004 Lamp control gear—Part 1:General and safety requirements

Publish Date: 2004-05-10

GB 19510.3-2004 Replaced

GB 19510.3-2004 Lamp controlgear—Part 3:Particular requirements for d.c.or a.c.supplied electronic step-down convertors for filament lamps

Publish Date: 2004-05-10

GB 19510.9-2004 Replaced

GB 19510.9-2004 Lamp control gear—Part 9:Particular requirements for ballasts for fluorescent lamps

Publish Date: 2004-05-10

GB 19510.12-2005 Replaced

GB 19510.12-2005 Lamp controlgear—Part 12:Particular requirements for miscellaneous electronic circuits used with luminaries

Publish Date: 2005-01-18