JG/T 313-2014 Active Industry standards-The construction industry

JG/T 313-2014 Metal sheath inorganic mineral insulated cables and their terminations with a rated voltage not exceeding 0.6/1 kV

Publish Date: 2014-09-11 Implement Date: 2015-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: JG/T 313-2014

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: Wire with an insulating layer

ICS Name: Wire and cable

Publish Date: 2014-09-11

Implement Date: 2015-02-01

Pages: 25 pages

Scope

This standard specifies the terms and definitions, classification, code, specifications and markings, general provisions, requirements, test methods, inspection rules, marking and labeling, packaging, transportation, and storage of metal sheathed inorganic mineral insulated cables and terminals with a rated voltage of 0.6/1 kV or lower.
This standard applies to metal sheathed inorganic mineral insulated cables and terminals for wiring with a rated voltage of 0.6/1 kV or lower.

Development Information

Word Count: 44 Thousand words Pages: 25 pages

Replace the following standards

JG/T 313-2011 Metal sheath inorganic mineral insulated cables and their terminations with a rated voltage not exceeding 750 V

Referenced Standards

GB/T 2059-2008 Strip of copper and copper alloy GB/T 2900.10-2013 Electrotechnical terminology—Electric cables GB/T 3048.4-2007 Test methods for electrical properties of electric cables and wires—Part 4:Test of DC resistance of conductors GB/T 3048.5-2007 Test methods for electrical properties of electric cables and wires—Part 5:Test of insulation resistance GB/T 3048.8-2007 Test methods for electrical properties of electric cables and wires—Part 8:AC voltage test GB/T 3956-2008 Conductors of insulated cables GB/T 5019.10-2009 Specification for insulating materials based on mica—Part 10:Mica paper tapes for flame-resistant security cables GB/T 6995.3-2008 Markings for electric wires and cables—Part 3:Identifications of cables and wires GB/T 6995.5-2008 Markings for electric wires and cables—Part 5:Identifications of insulated cores of power cables GB/T 12706.1-2008 Power cables with extruded insulation and their accessories for rated voltages from 1 kV(Um=1.2 kV)up to 35 kV(Um=40.5 kV)—Part 1:Cables for rated voltage of 1 kV(Um=1.2 kV)and 3 kV(Um=3.6 kV) GB/T 13033.1-2007 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V—Part 1:Cables GB/T 19216.21-2003 Tests for electric cables under fire conditions—Circuit integrity—Part 21:Procedures and requirements—Cable of rated voltage up to and including 0.6/1.0kV BS 6387:1994 YS/T 649-2007 Extruded rod and bar of copper and copper alloys JB/T 8137.1-1995 JB/T 8137.1-1995 - Specifications for the form and size of delivery racks for electric cables and wires JB/T 8137.1-2013 Wire and Cable Delivery Tray - Part 1: General requirements JB/T 8137.2-1995 JB/T 8137.2-1995 wire and cable delivery disk technical requirements JB/T 8137.2-2013 Wiring Cable Delivery Tray - Part 2: Full Wooden Construction Delivery Tray (English) JB/T 8137.3-2013 Wiring Cable Delivery Tray Part 3: Full Steelcorrugated Delivery Tray JB/T 8137.4-2013 Electric Cable and Wire Delivery Tray - Part 4: Steel Composite Structure Delivery Tray YS/T 649-2018 Copper and copper alloy extruded bar JB/T 8137.1-1999 JB/T 8137.1-1999 Electric wires and cables delivered on a plate - Part 1: General provisions JB/T 8137.2-1999 Wiring Cable Delivery Tray - Part 2: Full Wooden Construction Delivery Tray JB/T 8137.3-1999 Delivery tray for cables and wires - Part 3: Full steel corrugated structure delivery tray JB/T 8137.4-1999 Wiring Harness Delivery Vessel - Part 4: Steel and Composite Structure Delivery Vessels

Adopt standards

IEC 60702-1:2002、IEC 60702-2:2002

Related Standards

GB 6995.1-1986 Replaced

GB 6995.1-1986 Markings for electric cables and wires Part 1:General requirements

Publish Date: 1986-11-20

GB 6995.2-1986 Replaced

GB 6995.2-1986 Markings for electric cables and wires Part 2:Standard colors

Publish Date: 1986-11-20

GB 6995.3-1986 Replaced

GB 6995.3-1986 Markings for electric cables and wires Part 3:Identifications of cables and wires

Publish Date: 1986-11-20

GB 6995.4-1986 Replaced

GB 6995.4-1986 Markings for electric cables and wires Part 4:Identifications of insulated conductors of cables and wires for electrical appliances and equipments

Publish Date: 1986-11-20

GB 6995.5-1986 Replaced

GB 6995.5-1986 Markings for electric cables and wires Part 5:Identifications of insulated cores of power cables

Publish Date: 1986-11-20

GB/T 12666.1-1990 Abolished

GB/T 12666.1-1990 Test method on electric wires or cables under fire conditions Part 1:General

Publish Date: 1990-12-28