GB/T 2029-1980
Replaced
GB/T 13853-2009
Active
National standards
GB/T 13853-2009 General specification for hydraulic pumps and motors of ship
GB/T 13853-2009 General specification for hydraulic pumps and motors of ship
Basic Information
Standard Code:
GB/T 13853-2009
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Maritime hydraulic and pneumatic components and accessories
ICS Name:
\n Piping system
Publish Date:
2009-03-09
Implement Date:
2009-11-01
Pages:
16 pages
Scope
This standard specifies the requirements and inspection rules for marine hydraulic pumps and hydraulic motors (hereinafter referred to as pump-motors. When the pump-motor is used as a pump, it is referred to as a pump; when it is used as a motor, it is referred to as a motor, and the same applies hereinafter).
This standard applies to the design and acceptance of volumetric pump-motors whose working medium is petroleum-based hydraulic oil.
Development Information
Replace the following standards
Referenced Standards
GB/T 14039-2002 Hydraulic fluid power—Fluids—Method for coding the level of contamination by solid particles
CB 1146.2
CB 1146.3
CB 1146.4
CB 1146.6
CB 1146.9
CB 1146.11
CB 1146.12
ISO 6162-1
GB/T 2346-2003 Fluid power systems and components-Nominal pressures
GB/T 2347-1980 Hydraulic fluid power—Pumps and motors—Geometric displacements
GB/T 2353-2005 Dimension series and identification code for mounting flanges and shaft ends of hydraulic pumps and motors
GB 2353.1-1994 Hydraulic fluid power—Positive displacement pumps and motors—Dimensions and identification code for mounting flanges and shaft ends—Part 1:Two-and four-hole flanges and shaft ends
GB/T 2353.2-1993 Hydraulic fluid power—Positive displacement pumps and motors—Dimensions and identification code for mounting flanges and shaft ends—Part 2:Polygonal flanges(including circular flanges)
GB/T 2878-1993 Fluid power systems and components—Ports—Dimensions and design
GB/T 2878.1-2011 Connections for hydraulic fluid power—Ports and stud ends with metric threads and O-ring sealing—Part 1:Ports
GB/T 2878.2-2011 Connections for hydraulic fluid power—Ports and stud ends with metric threads and O-ring sealing—Part 2:Heavy-duty stud ends (S series)
GB/T 2878.3-2017 Connections for hydraulic fluid power—Ports and stud ends with metric threads and O-ring sealing—Part 3:Light-duty stud ends (L series)
GB/T 2878.4-2011 Connections for hydraulic fluid power—Ports and stud ends with metric threads and O-ring sealing—Part 4:Hex plugs
GB/T 7935-2005 Hydraulic fluid power—General requirements for hydraulic components
GB/T 7936-2012 Hydraulic fluid power—positive displacement pumps and motors—Determination of derived capacity
GB/T 13306-1991 Plates
GB/T 13306-2011 Plates
GB/T 17446-1998 Fluid power systems and components—Vocabulary
GB/T 17446-2012 Fluid power systems and components—Vocabulary
GB/T 17446-2024 Fluid power systems and components—Vocabulary
JB/T 2184-2007 JBT 2184-2007 Hydraulic components model designation method
JB/T 7858-2006 Hydraulic component cleanliness evaluation method and hydraulic component cleanliness index
JB/T 2184-1977 Hydraulic components model numbering method
JB/T 7858-1995 Hydraulic components cleanliness evaluation method and hydraulic components cleanliness index
GB/T 2878.1-2025 Connections for hydraulic fluid power—Ports with truncated housing and stud ends with metric threads—Part 1:Ports with truncated housing
Related Standards
GB/T 2030-1980
Replaced
GB/T 2030-1980 Bronze suction valve for seaward sluice
GB 3033-1982
Replaced
GB 3033-1982 Paint colors for marine pipes and their identification symbols
GB/T 1241-1983
Replaced
GB/T 1241-1983 Marine forged steel male thread stop and check valves
GB/T 594-1983
Replaced
GB/T 594-1983 Marine forged steel male thread stop valves
GB/T 595-1983
Replaced