GB/T 3691-1983
Replaced
GB/T 31387-2015
Active
National standards
GB/T 31387-2015 Reactive powder concrete
GB/T 31387-2015 Reactive powder concrete
Basic Information
Standard Code:
GB/T 31387-2015
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Concrete, aggregates, mortar, and grout
ICS Name:
Concrete and concrete products
Publish Date:
2015-02-04
Implement Date:
2015-11-01
Pages:
14 pages
Scope
This standard specifies the terms and definitions, classification, performance grades, and marking of reactive powder concrete; the raw materials; the design of the mix ratio; the preparation and transportation; the curing; the test methods; and the inspection rules.
This standard applies to reactive powder concrete that is either cast on-site or prefabricated in a factory.
Development Information
Referenced Standards
GB/T 50082
GB 175-1999 Portland cement and ordinary Portland cement
GB 175-2007 Common portland cement
GB 175-2023 Common portland cement
GB/T 1596-1991 Fly ash used for cement and concrete
GB/T 1596-2005 Fly ash used for cement and concrete
GB/T 1596-2017 Fly ash used for cement and concrete
GB 8076-1997 Concrete admixtures
GB 8076-2008 Concrete admixtures
GB/T 18046-2000 Ground granulated blast furnace slag used for cement and concrete
GB/T 18046-2008 Ground granulated blast furnace slag used for cement and concrete
GB/T 18046-2017 Ground granulated blast furnace slag used for cement,mortar and concrete
GB/T 21120-2007 Synthetic fibres for cement,cement mortar and concrete
GB/T 21120-2018 Synthetic fibres for cement concrete and mortar
GB/T 26408-2011 Concrete truck mixer
GB/T 26408-2020 Concrete truck mixer
GB/T 27690-2011 Silica fume for cement mortar and concrete
GB/T 27690-2023 Silica fume for cement mortar and concrete
GB/T 28293-2012 Ground iron and steel slag
JC/T 874-2021 Methods for Chemical Analysis of Siliceous Raw Materials Used in Cement Production
GB 50119-2013 Code for concrete admixture application
JC/T 874-2009 Chemical Analysis Methods for Silica Raw Materials Used in Cement
GB/T 50080-2016 Standard for test method of performance on ordinary fresh concrete
GB/T 50081-2019 Standard for test methods of concrete physical and mechanical properties
GB 50164-2011 Standard for quality control of concrete
GB 50204-2015 Concrete Structure Construction Quality Acceptance Standards
JGJ 52-2006 Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete
JGJ 63-2006 Standard of water for concrete
GB/T 8076-2025 Concrete admixtures
Related Standards
GB/T 3692-1983
Replaced
GB/T 3692-1983 Test method of ferrocement panels in axial tension
GB/T 4582-1984
Active
GB/T 4582-1984 Terms and their definition of ferrocement
GB/T 8075-1987
Replaced
GB/T 8075-1987 Classification, nomenclature and definition of concrete admixtures
GB/T 14908-1994
Abolished
GB/T 14908-1994 Internal and partition concrete panel in residence
GB 396-1994
Replaced