GB/T 19959-2005
Active
GB/T 30417-2026
Pending
National standards
GB/T 30417-2026 General technical requirements for lacquerware
GB/T 30417-2026 General technical requirements for lacquerware
Basic Information
Standard Code:
GB/T 30417-2026
Standard Type:
National standards
Standard Status:
Pending
is_force_gb:
no
CCS Name:
Decorative arts and crafts
ICS Name:
Art and crafts
Publish Date:
2026-02-27
Implement Date:
2026-09-01
Pages:
20 pages
Scope
This document provides information on the classification of lacquerware, specifies the requirements for raw materials and auxiliary materials, semi-finished products, and finished products, as well as inspection rules, marking, user manuals, packaging, transportation, and storage requirements, and describes the corresponding inspection methods.
This document is applicable to the design, creation, production, and sale of lacquerware.
Development Information
Replace the following standards
Referenced Standards
GB/T 1725-2007 Paints,varnishes and plastics—Determination of non-volatile-matter content
GB/T 1727-2021 General methods for preparation of coating films
GB/T 1731-2020 Determination of flexibility of coating and putty films
GB/T 1732-2020 Determination of impact resistance of coating films
GB/T 1733-1993 Determination of resistance to water of films
GB/T 1735-2009 Paints and varnishes—Determination of heat resistance
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 3299-1996 Standard test method for water absorption of domestic ceramic ware
GB/T 3299-2011 Test method for water absorption of domestic ceramicware
GB/T 3324-2024 General technical requirements for wooden furniture
GB/T 3923.1-1997 Textiles—Tensile properties of fabrics—Part 1:Determination of breaking force and elongation at breaking force—Strip method
GB/T 3923.1-2013 Textiles—Tensile properties of fabrics—Part 1:Determination of maximum force and elongation at maximum force using the strip method
GB/T 4893.1-2021 Test of surface coatings of furniture—Part 1: Determination of surface resistance to cold liquids
GB/T 4893.4-2023 Test of surface coating of furniture—Part 4:Determination of adhesion by cross-cut
GB/T 5296.6-2004 Instructions for use of products of consumer interest—Part 6:furniture
GB/T 5296.6-2025 Instructions for use of products of consumer interest—Part 6:furniture
GB/T 6739-2022 Paints and varnishes—Determination of film hardness by pencil test
GB/T 9288-1998 Analyse method of gold content in jewellery
GB/T 9288-2006 Gold jewellery alloys—Determination of gold—Cupellation method (fire assay)
GB/T 9288-2019 Gold jewellery alloys—Determination of gold—Cupellation method(fire assay)
GB/T 11886-2001 Chemical analysis—Method of silver content in jewellery
GB/T 11886-2015 Silver jewellery alloys—Determination of sliver—Volhard method
GB/T 12914-1991 Paper and board—Determination of tensile properties—Constant rate of elongation method
GB/T 12914-2008 Paper and board—Determination of tensile properties
GB/T 12914-2018 Paper and board—Determination of tensile properties—Constant rate of elongation method(20 mm/min)
GB/T 14703-1993 Raw lacquer
GB/T 14703-2008 Raw lacquer
GB/T 16799-2018 Furniture leather
GB/T 17832-1999 Determination of silver in silver jewellery alloys—Volumetric (potentiometric) method using potassium bromide
GB/T 17832-2008 Silver jewellery alloys—Determination of silver—Volumetric(potentionmetric)method using potassium bromide
GB/T 17832-2021 Silver jewellery alloys—Determination of silver—Volumetric (potentiometric) method using potassium bromide
GB/T 18043-2000 Precious metal jewellery content non-damaged test method—X-ray fluorescence spectrometry
GB/T 18043-2008 Jewellery—Determination of precious metal content—Method using X-Ray fluorescence spectrometry
GB/T 18043-2013 Jewellery—Determination of precious metal content—Method using X-Ray fluorescence spectrometry
GB 18581-2020 Limit of harmful substances of woodenware coatings
GB 18584-2024 Limit of harmful substances of furniture
GB/T 19959-2005 Product of geographical indication—Yangzhou lacquerware
GB/T 23704-2009 Information technology—Automatic identification and data capture techniques—Bar code print quality test specification—Two-dimensional symbols
GB/T 23704-2017 Two-dimensional bar code symbol print quality test
GB/T 40114-2021 Jewellery—Determination of precious metal content—Difference method usinginductively coupled plasma optical emission spectroscopy
JJG 696-2002 Specular Gloss Meters and Gloss Plates
JJG 696-2015 Specular Gloss Meters and Gloss Plates
Related Standards
GB/T 21930-2008
Active
GB/T 21930-2008 Product of geographical indication—Yunjin
GB/T 23114-2008
Replaced
GB/T 23114-2008 Plaited bamboo products
GB/T 23172-2008
Replaced
GB/T 23172-2008 Plaited rattan products
LY/T 1843-2009
Abolished
LY/T 1843-2009 Bamboo mat,cushion and carpet
GB/T 28796-2012
Replaced