GB/T 5982-1986
Replaced
GB/T 25423-2023
Active
National standards
GB/T 25423-2023 Rectangular bale baler
GB/T 25423-2023 Rectangular bale baler
Basic Information
Standard Code:
GB/T 25423-2023
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Agricultural machinery and equipment
ICS Name:
Harvesting equipment
Publish Date:
2023-11-27
Implement Date:
2024-06-01
Pages:
16 pages
Scope
This document defines the terms and definitions of square bale balers, specifies the product model representation method, technical requirements, inspection rules, marking, packaging, transportation, and storage, and describes the corresponding test methods.
This document is applicable to tractor-powered square bale balers that use twine for tying. Other models should refer to and implement it accordingly.
Development Information
Replace the following standards
Referenced Standards
GB/T 3766-2015 Hydraulic fluid power—General rules and safety requirements for systems and their components
GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 5262-2008 Measuring methods for agricultural machinery testing conditions—General rules
GB/T 9239.1-2006 Mechanical vibration—Balance quality requirements for rotors in a constant(rigid)state—Part 1:Specification and verification of balance tolerances
GB 10395.1-2009 Agricultural and forestry machinery—Safety—Part 1:General requirements
GB/T 5667-1985 Productive testing methods for agricultural machinery
GB/T 5667-2008 Productive testing methods for agricultural machinery
GB/T 9480-2001 Tractors machinery for agriculture and forestry,powered lawn and garden equipment—Operator's manuals—Content and presentation
GB 10395.20-2010 Agricultural and forestry machinery—Safety—Part 20:Pick-up balers
GB/T 10395.20-2021 Agricultural and foresty machinery—Safety—Part 20:Pick-up balers
GB 10396-1999 Tractors,machinery for agriculture and forestry,powered lawn and garden equipment—Safety signs and hazard pictorials—General principles
GB 10396-2006 Tractors,machinery for agriculture and forestry,powered lawn and garden equipment—Safety signs and hazard pictorials—General principles
GB/T 13306-1991 Plates
GB/T 13306-2011 Plates
JB/T 5160-2010 Hay harvester
JB/T 5167-2007 Polypropylene rope and steel wire for baling machine
JB/T 5673-2015 JBT 5673-2015 Agricultural and Forestry Tractors and Machinery Coating General Technical Specification
JB/T 8581-2010 Animal husbandry machinery product model numbering rules
JB/T 9700-2013 Grass harvesting machinery test methods general provisions
JB/T 9702-2010 The square bale tying machine has a knotter
JB/T 5167-1991 Screw press wire cutter for baler
JB/T 5673-1991 A general technical specification for painting of agricultural and forestry tractors and implements
JB/T 8581-1997 Animal husbandry machinery product model numbering rules
JB/T 9702-1999 Pickup baler twine tying device technical specification
JB/T 5160-1991 Technical Specifications for Forage Testing Machines
JB/T 9832.2-1999 Tractors and machinery for agriculture and forestry—Paints adherence performance—Cross-cut test
JB/T 9702-2024 JBT 9702-2024 Square bale baler twine feeder
JB/T 5160-2025 Hay bale harvester
JB/T 8581-2025 Livestock Machinery Product Model Formulation Rules
Related Standards
GB/T 6979-1986
Replaced
GB/T 6979-1986 Terminology for grain harvesting machinery
GB/T 14178-1993
Replaced
GB/T 14178-1993 Measurement at the operator's position of airborne noise emitted by brush saws
GB/T 14179-1993
Replaced
GB/T 14179-1993 Brush saws—Measurements of hand-transmitted vibration
GB/T 14224-1993
Abolished
GB/T 14224-1993 Classification and terminology for machine of hay and forage harvesting
GB/T 14247-1993
Replaced