GB/T 3898-1983
Replaced
GB/T 39657-2020
Active
National standards
GB/T 39657-2020 Backhoe dredger supervisory control system
GB/T 39657-2020 Backhoe dredger supervisory control system
Basic Information
Standard Code:
GB/T 39657-2020
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Maritime electronic control devices and measurement equipment
ICS Name:
Navigation and control equipment
Publish Date:
2020-12-14
Implement Date:
2021-07-01
Pages:
28 pages
Scope
This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, and storage for dredging monitoring systems of dredgers.
This standard applies to the design, manufacture, modification, and acceptance of dredging monitoring systems for dredgers. It can also be used as a reference for maintenance purposes.
Development Information
Referenced Standards
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle)
GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal)
GB/T 2423.16-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test J and guidance:Mold growth
GB/T 2423.17-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ka:Salt mist
GB/T 2423.18-2012 Environmental testing—Part 2:Test methods—Test Kb:Salt mist,cyclic(sodium chloride solution)
GB/T 2423.101-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test:Inclinations and swings
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 6587-2012 General specification for electronic measuring instruments
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB/T 15479-1995 Technical requirements and test methods of insulation resistance and insulating strength for use in industrial process measurement and control instruments
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.11-2008 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests
GB/T 21671-2018 Ethernet technology based local area network(LAN)systems acceptance test methods
GB/T 28965-2012 Grab dredger supervisory control system
GB/T 28966-2012 Cutter/bucket-wheel dredger supervisory control system
钢质海船入级规范(2018) 中国船级社
国内航行海船入级规则(2018) 中国船级社
国内航行海船建造规范(2018) 中国船级社
钢质内河船舶建造规范(2016) 中国船级社
Related Standards
GB/T 10846-1989
Replaced
GB/T 10846-1989 General specifications of marine autopilot with magnetic compass
GB/T 11576-1989
Abolished
GB/T 11576-1989 Methods of test on automatic control of compressed air , bilge, fresh water and sanitary systems for smaller ships
GB/T 11875-1989
Replaced
GB/T 11875-1989 General specifications of marine rate-of-turn indicators
GB/T 11876-1989
Replaced
GB/T 11876-1989 General specifications of follow-up pilot for use in ships
GB/T 12267-1990
Active