GB/T 5565-2006 Replaced National standards

GB/T 5565-2006 Rubber or plastics hoses and tubing—Bending tests

Publish Date: 2006-12-29 Implement Date: 2007-06-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 5565-2006

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Rubber hoses, adhesive tapes, and rubber cloths

ICS Name: Plastic pipe

Publish Date: 2006-12-29

Implement Date: 2007-06-01

Pages: 7 pages

Scope

This standard specifies two methods for determining the performance of reinforced and non-reinforced rubber or plastic hoses when bent to a specified bending radius. Method A is suitable for reinforced and non-reinforced hoses with an inner diameter of less than 80 mm. This method also provides a method for measuring the stress required to achieve the specified bending radius under a specified internal pressure. Method B determines the bending performance, including the stress required for bending, at a range of temperatures from -60°C to +200°C. The characteristics of the device limit its applicability to small-diameter reinforced and non-reinforced hoses, i.e., those with an inner diameter of less than 12.5 mm.

Development Information

Word Count: 12 Thousand words Pages: 7 pages

Replace the following standards

GB/T 5565-1994 Rubber or plastics hoses and tubing—Bending tests

Superseded by the following standards

GB/T 5565.1-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1:Bending tests at ambient temperatures

Referenced Standards

GB/T 9573-2003 Rubber and plastics hose and hose assemblies—Methods of measurement of dimensions GB/T 2941-2006 Rubber—General procedures for preparing and conditioning test pieces for physical test methods GB/T 2941-2025 Rubber—General procedures for preparing and conditioning test pieces for physical test methods

Adopt standards

ISO 1746:1998

Related Standards

GB/T 7155.1-1987 Abolished

GB/T 7155.1-1987 Determination of density of thermoplastic pipes and fittings—Part 1:Determination of reference density of polyethylene pipes and fittings

Publish Date: 1987-01-02

GB/T 7155.2-1987 Abolished

GB/T 7155.2-1987 Determination of density of thermoplastic pipes and fittings—Part 2:Determination of density of polypropylene pipes and fittings

Publish Date: 1987-01-02

GB/T 13018-1991 Abolished

GB/T 13018-1991 Polyethylene (PE) pipes—Tolerances on outside diameters and wall thicknesses

Publish Date: 1991-07-03

GB/T 13019-1991 Abolished

GB/T 13019-1991 Polypropylene (PP) pipes—Tolerances on outside diameters and wall thicknesses

Publish Date: 1991-07-03

GB/T 13020-1991 Abolished

GB/T 13020-1991 Unplasticized polyvinyl chloride (PVC-U) pipes—Tolerances on outside diameters and wall thicknesses

Publish Date: 1991-07-03

GB/T 13526-1992 Replaced

GB/T 13526-1992 Unplasticized polyvinyl chloride (PVC-U) pipes—Dichloromethane test

Publish Date: 1992-06-12