GB/T 11372-1989
Replaced
GB/T 19436.1-2025
Active
National standards
GB/T 19436.1-2025 Electrical safety of machinery—Electro-sensitive protective equipment—Part 1:General requirements and tests
GB/T 19436.1-2025 Electrical safety of machinery—Electro-sensitive protective equipment—Part 1:General requirements and tests
Basic Information
Standard Code:
GB/T 19436.1-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Health, safety, and labor protection
ICS Name:
Integration of mechanical systems and standard parts
Publish Date:
2025-10-31
Implement Date:
2026-05-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国工业机械电气系统标准化技术委员会(SAC/TC 231)
Pages:
56 pages
Scope
本文件规定了专门用于检测人体或人体部分的非接触型电敏保护设备(ESPE)的设计、制造和试验的总则，电敏保护设备是安全相关系统的组成部分。需要特别注意的是，针对其功能和设计要求，要确保达到适宜的安全相关性能。电敏保护设备(ESPE)能包括选择性的安全相关功能，这些要求在附录A中给出。
注：“非接触型”意味着不需要人体接触来进行传感。
本文件旨在与GB/T 19436的后续部分一起使用，后续部分是基于敏感技术的特殊要求。
示例：本文件和GB/T 19436.2用于使用有源光电保护装置(AOPDs)；本文件和GB/T 19436.3用于使用有源光电漫反射保护装置(AOPDDRs)。
如果不存在涵盖敏感技术的部分，则使用IEC TS 62998-1。
如果GB/T 19436系列没有包含所有必要的规定，则使用IEC TS 62998-1。
除IEC TS 62998-1外，还可结合GB/T 19436系列所涵盖部分。
Development Information
Drafting Units:
国家机床质量监督检验中心、济宁科力光电产业有限责任公司、西安交通大学、中微半导体设备(上海)股份有限公司、山东莱恩光电科技股份有限公司、北京机床研究所有限公司、中国科学院沈阳计算技术研究所有限公司、上海电气集团股份有限公司中央研究院
Drafting Persons:
薛瑞娟、吴翟、黄祖广、张颖、邵光存、赵立波、林启敬、张国杰、卢振伟、胡进芳、尹震宇、高知国、张培森、王海涛、陈忠、吴怡然、王楚婷、于春平
Same series standard
Replace the following standards
Referenced Standards
GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields
GB/T 17626.11-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 11:Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
GB/T 17626.29-2006 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations on d.c .input power port immunity tests
GB/T 17799.7-2022 Electromagnetic compatibility—Generic standards—Part 7:Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations
GB/T 16855.2-2015 Safety of machinery—Safety-related parts of control systems—Part 2:Validation
ISO 13849-1
ISO 12100
IEC 60068-2-6
IEC 60068-2-27
IEC 60068-2-64
IEC 60417
IEC 60447
IEC 60445
IEC 60529
IEC 60721-3-5
IEC TR 60721-4-3
IEC 60947-1:2007
IEC 60947-1:2007/AMD2:2014
IEC 61000-4-3:2006
IEC 61000-4-3:2006/AMD1:2007
IEC 61000-4-3:2006/AMD2:2010
IEC 61000-4-5:2014/AMD1:2017
IEC 615808-2
IEC 61508(所有部分)
IEC 62061
Adopt standards
IEC 61496-1:2020
Related Standards
GB/T 13309-1991
Replaced
GB/T 13309-1991 Specification for mechanical vibration generator system
GB/T 13310-1991
Replaced
GB/T 13310-1991 Specification for electrodynamic vibration generator system
GB/T 13306-1991
Replaced
GB/T 13306-1991 Plates
GB/T 15755-1995
Active
GB/T 15755-1995 The calculation and selection of cone interference fits
GB/T 10943-2003
abolished_transferred