GB/T 11372-1989
Replaced
GB/T 19436.2-2025
Active
National standards
GB/T 19436.2-2025 Electrical safety of machinery—Electro-sensitive protective equipment—Part 2:Particular requirements for equipment using active opto-electronic protective devices(AOPDs)
GB/T 19436.2-2025 Electrical safety of machinery—Electro-sensitive protective equipment—Part 2:Particular requirements for equipment using active opto-electronic protective devices(AOPDs)
Basic Information
Standard Code:
GB/T 19436.2-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Health, safety, and labor protection
ICS Name:
Integration of mechanical systems and standard parts
Publish Date:
2025-10-31
Implement Date:
2026-05-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国工业机械电气系统标准化技术委员会(SAC/TC 231)
Pages:
48 pages
Scope
本文件规定了敏感功能使用有源光电保护装置(AOPDs)，专门用于检测人体的电敏保护设备（ESPE）的设计、制造和试验的要求，电敏保护设备是安全相关系统的组成部分。需要特别注意的是，针对其特性，要确保达到适宜的安全相关性能。ESPE能包括一些选择性的安全功能，对此类功能的要求在GB/T 19436.1—2025和本文件的附录A给出。
本文件没有规定检测区的尺寸或形状以及它在任何特殊应用中涉及危险部件的布置，也未说明由什么构成任何机械的危险状态。本文件只限于ESPE的功能及如何与机械进行连接。
本文件不包括使用辐射波长在400 nm～1 500 nm范围以外的AOPDs。
本文件可能与那些对非人体保护的应用有关，例如：保护机械或产品免于机械损坏。在这些应用中，可能需要附加的要求，例如必须由敏感功能辨认的材料，具有不同于人的一些特性。
本文件不涉及电磁兼容性（EMC）的发射要求。
Development Information
Drafting Units:
国家机床质量监督检验中心、济宁科力光电产业有限责任公司、西安交通大学、山东莱恩光电科技股份有限公司、北京机床研究所有限公司、中国科学院沈阳计算技术研究所有限公司、科德数控股份有限公司
Drafting Persons:
薛瑞娟、吴翟、黄祖广、张颖、邵光存、赵立波、林启敬、卢振伟、张国杰、胡进芳、尹震宇、高知国、张培森、吴怡然、王楚婷、王大伟
Same series standard
Replace the following standards
Referenced Standards
GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields
GB/T 17626.11-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 11:Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
GB/T 17626.29-2006 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations on d.c .input power port immunity tests
GB/T 17799.7-2022 Electromagnetic compatibility—Generic standards—Part 7:Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations
GB/T 16855.2-2015 Safety of machinery—Safety-related parts of control systems—Part 2:Validation
ISO 13849-1
ISO 12100
IEC 60068-2-6
IEC 60068-2-27
IEC 60068-2-64
IEC 60417
IEC 60447
IEC 60445
IEC 60529
IEC 60721-3-5
IEC TR 60721-4-3
IEC 60947-1:2007
IEC 60947-1:2007/AMD2:2014
IEC 61000-4-3:2006
IEC 61000-4-3:2006/AMD1:2007
IEC 61000-4-3:2006/AMD2:2010
IEC 61000-4-5:2014/AMD1:2017
IEC 615808-2
IEC 61508(所有部分)
IEC 62061
ISO 13855
ISO 20471
IEC 60825-1
IEC 62046
IEC 62471
Adopt standards
IEC 61496-2:2020
Related Standards
GB/T 13309-1991
Replaced
GB/T 13309-1991 Specification for mechanical vibration generator system
GB/T 13310-1991
Replaced
GB/T 13310-1991 Specification for electrodynamic vibration generator system
GB/T 13306-1991
Replaced
GB/T 13306-1991 Plates
GB/T 15755-1995
Active
GB/T 15755-1995 The calculation and selection of cone interference fits
GB/T 10943-2003
abolished_transferred