GB 6450-1986
Replaced
GB/T 23755-2009
Replaced
National standards
GB/T 23755-2009 Three-phase site-combined power transformers
GB/T 23755-2009 Three-phase site-combined power transformers
Basic Information
Standard Code:
GB/T 23755-2009
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Transformer
ICS Name:
Transformers, reactors, and inductors
Publish Date:
2009-05-06
Implement Date:
2009-11-01
Pages:
15 pages
Scope
This standard specifies the terms and definitions, usage conditions, product models, basic parameters, technical requirements, nameplates, allowable deviations, test items and methods, markings, lifting, installation, transportation, and storage for three-phase combined transformers with a rated capacity of 63,000 kVA or more, a voltage rating of 110 kV, 220 kV, and 500 kV, and a rated frequency of 50 Hz.
This standard applies to oil-immersed power transformers used in substations or power plants with limited transportation conditions.
Development Information
Superseded by the following standards
Referenced Standards
GB 1094.1-1996 Power transformers—Part 1:General
JBT 3837
GB 1094.2-1996 Power transformers—Part 2:Temperature rise
GB/T 1094.2-2013 Power transformers—Part 2:Temperature rise for liquid-immersed transformers
GB/T 1094.3-2003 Power transformers—Part 3:Insulation levels,dielectric tests and external clearances in air
GB/T 1094.3-2017 Power transformers—Part 3:Insulation levels,dielectric tests and external clearances in air
GB 1094.5-2003 Power transformers—Part 5:Ability to withstand short circuit
GB/T 1094.5-2008 Power transformers—Part 5:Ability to withstand short circuit
GB/T 1094.7-2008 Power transformers—Part 7:Loading guide for oil-immersed power transformers
GB/T 1094.10-2003 Power transformers—Part10:Determination of sound levels
GB/T 1094.10-2022 Power transformers—Part 10:Determination of sound levels
GB/T 2900.15-1997 Electrotechnical terminology Transformer, instrument transformer, voltage regulator and reactor
GB/T 6451-1999 Specification and technical requirements for three-phase oil-immersed power transformers
GB/T 6451-2008 Specification and technical requirements for oil-immersed power transformers
GB/T 6451-2015 Specification and technical requirements for oil-immersd power transformers
GB/T 6451-2023 Technical parameters and requirements for oil-immersed power transformers
GB/T 14597-1993 Environmental climatic conditions appearing in different higher lands for electrical products
GB/T 14597-2010 Environmental climatic conditions appearing in different altitudes for electrical products
JB/T 501-2021 Electric power transformer test guidelines
JB/T 501-2006 Electric power transformer test guidelines
JB/T 10088-2016 JBT 10088-2016 6kV~1000kV-level power transformer sound level
JB/T 501-1991 Electric power transformer test guidelines
JB/T 10088-2004 6kV~500kV Class Power Transformers' Sound Level
GB/T 1094.7-2024 Power transformers—Part 7:Loading guide for mineral-oil-immersed power transformers
Related Standards
GB/T 7449-1987
Replaced
GB/T 7449-1987 Guide to the lightning impulse and switching impulse testing of power transformers and reactors
GB 13028-1991
Abolished
GB 13028-1991 Isolating transformers and safety isolating transformers Requirements
GB/T 14006-1992
Active
GB/T 14006-1992 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment—Part 1:Transformers and inductors using YEI-1 laminations
GB/T 14860-1993
Replaced
GB/T 14860-1993 Generic specification for transformers and inductors for use in telecommunication and electronic equipment
GB/T 15164-1994
Replaced