CB/T 3647-1994 Marine Wormcast Iron Components

GB 223.1 GB 223.2 YB 35(17) YB 35(23) GB/T 222-1984 Method of sampling steel for determination of chemical composition and permissible variations for product analysis GB/T 222-2006 Permissible tolerances for chemical composition of steel products GB/T 223.3-1988 Methods for chemical analysis of iron, steel and alloy—The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content GB/T 223.4-1988 Methods for chemical analysis of iron, steel and alloy The volumetric method for determination of manganese content by ammonium nitrate oxidation GB/T 223.4-2008 Alloyed steel—Determination of manganese content—Potentiometric or visual titration method GB/T 223.5-1997 Methods for chemical analysis of iron,steel and alloy—The reduced molybdosilicate spectro photometric method for the determination of acid-soluble silicon content GB/T 223.5-2008 Steel and iron—Determination of acid-soluble silicon and total silicon content—Reduced molybdosilicate spectrophotometric method GB/T 223.46-1989 Methods for chemical analysis of iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of magnesium content GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.2-2002 Metallic Brinell hardness test—Part 2:Verification and calibration of hardness testers GB/T 231.2-2012 Metallic materials—Brinell hardness test—Part 2:Verification and calibration of testing machines GB/T 231.2-2022 Metallic materials—Brinell hardness test—Part 2:Verification and calibration of testing machines GB/T 231.3-2002 Metallic Brinell hardness test—Part 3:Calibration of hardness reference blocks GB/T 231.3-2012 Metallic materials—Brinell hardness test—Part 3:Calibration of reference blocks GB/T 231.3-2022 Metallic materials—Brinell hardness test—Part 3:Calibration of reference blocks GB/T 231.4-2009 Metallic materials—Brinell hardness test—Part 4:Tables of hardness values GB/T 5612-1985 Code for representing cast iron GB/T 5612-2008 Code for representing cast iron GB/T 6060.1-1997 Roughness comparison specimens—Cast surfaces GB/T 6060.1-2018 Surface roughness comparison specimen—Part 1:Casting surface GB/T 6414-1999 Castings—System of dimensional tolerances and machining allowances GB/T 6414-2017 Castings—Dimensional tolerances and geometrical tolerances and machining allowances CB 1030-1983 Worm-shaped graphite cast iron metallographic inspection GB/T 5612-2025 Designation of cast irons GB/T 222-2025 Steels and alloys—Permissible deviations of product analyzed chemical composition