GB 17646-1998
Replaced
GB/T 40082-2021
Active
National standards
GB/T 40082-2021 Wind turbines—Drive train ground test specification
GB/T 40082-2021 Wind turbines—Drive train ground test specification
Basic Information
Standard Code:
GB/T 40082-2021
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Wind energy
ICS Name:
Wind power generation systems and other energy sources
Publish Date:
2021-04-30
Implement Date:
2021-11-01
Pages:
23 pages
Scope
This standard specifies the technical requirements for ground testing of the performance of the drive chain of variable-speed constant-frequency wind turbine generators, including testing equipment and instruments, test content and methods, inspection rules, and report content. This standard applies to horizontal-axis wind turbine generators with a swept area of more than 200 m2.
Development Information
Referenced Standards
GB/T 3785.1-2010 Electroacoustics—Sound level meters—Part 1:Specifications
GB/T 17626.30-2012 Electromagnetic compatibility—Testing and measurement techniques—Power quality measurement methods
GB/T 22095-2008 Cast iron surface plates
GB/T 25389.2-2018 Wind turbines—Permanent magnet synchronous generator—Part 2:Testing methods
JJG 144-2007 Standard Dynamometers
GB/T 1032-2005 Test procedures for three-phase induction motors
GB/T 1032-2012 Test procedures for three-phase induction motors
GB/T 1032-2023 Test methods for three-phase asynchronous motors
GB/T 2900.53-2001 Electrotechnical terminology—Wind turbine generator systems
GB 5226.1-2002 Safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB 5226.1-2008 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 9239.1-2006 Mechanical vibration—Balance quality requirements for rotors in a constant(rigid)state—Part 1:Specification and verification of balance tolerances
GB 18451.1-2001 Wind turbine generator systems—Safety requirements
GB/T 18451.1-2012 Wind turbine generator systems—Design requirements
GB/T 18451.1-2022 Wind energy generation systems—Design requirements
GB/T 19568-2004 Assembling and installation regulation for wind turbine generator systems
GB/T 19568-2017 Wind turbines—Assembling and installation regulation
GB/T 25389.1-2010 Wind turbine low-speed permanent magnet synchronous generator—Part 1:Technical conditions
GB/T 25389.1-2018 Wind turbines—Permanent magnet synchronous generator—Part 1:Technical conditions
GB/T 35854-2018 Mechanical vibration measurement and evaluation for the wind turbines and their components
GB/T 36994-2018 Wind turbines—Test procedure of grid adaptability
GB/T 36995-2018 Wind turbines—Test procedure of voltage fault ride through capability
JB/T 7486-2008 Temperature Sensor Series Schema
JB/T 11498-2013 JBT 11498-2013 grating rotary encoder
GB 50040-2020 Code for design of dynamic machine foundation
GB/T 19568-2025 Wind energy generation systems—Assembling and installation specificationof wind turbines
Related Standards
GB 18451.1-2001
Replaced
GB 18451.1-2001 Wind turbine generator systems—Safety requirements
GB/T 2900.53-2001
Active
GB/T 2900.53-2001 Electrotechnical terminology—Wind turbine generator systems
GB/T 18709-2002
Active
GB/T 18709-2002 Methodology of wind energy resource measurement for wind farm
GB/T 18710-2002
Active
GB/T 18710-2002 Methodology of wind energy resource assessment for wind farm
GB/T 4750-2002
Replaced