T/CI 165-2022 Fully Automatic Oil Separation Device
T/CI 165-2022 Fully Automatic Oil Separation Device
Basic Information
Scope
Scope: This document specifies the terms and definitions, product marking, structural types and parameters, operating environment, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of fully automatic oil separator equipment. This document applies to the design, manufacture, and inspection of fully automatic oil separator equipment with a water treatment capacity of not more than 55 m3/h; wastewater containing no more than 500 mg/L of plant and animal oil and grease, and a suspended matter concentration of no more than 600 mg/L; and a water temperature of not less than 5°C. Main technical content: 5.1 Operating Environment: The operating temperature of the oil separator equipment shall not be lower than 5°C. When installed indoors, the installation site shall be equipped with odor treatment devices and ventilation devices, with a ventilation frequency of 8 times/h to 12 times/h. Washing water sources and floor drainage facilities shall be provided. 5.2 Appearance: 5.2.1 The surface of the oil separator equipment shall be free of burrs and collision dents, and the diagonal error shall not exceed 5 mm. 5.2.2 For stainless steel materials, the appearance of the oil separator equipment shall be aesthetically pleasing, with no scratches on the surface. 5.2.3 For plastic materials, the oil separator equipment shall be free of cracks and have a smooth surface. 5.3 General Requirements: 5.3.1 The effluent water quality treated by the oil separator equipment shall comply with the provisions of GB/T 31962-2015, where 4.2 stipulates that the content of plant and animal oil shall not exceed 100 mg/L, and the suspended matter concentration shall not exceed 300 mg/L. 5.3.2 The oil separator equipment consists of the following components: solid-liquid separation zone, oil-water separation zone, oil collection device, residue concentration device, oil collection barrel, and lifting device (optional). Its structural type and dimensions s