CJ/T 270-2007 Replaced Industry standards-Urban construction

CJ/T 270-2007 Steel reinforced spirally wound Polyethylene(PE) drainage pipe

CJ/T 270-2007 Steel reinforced spirally wound Polyethylene(PE) drainage pipe

Publish Date: 2007-12-21 Implement Date: 2008-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: CJ/T 270-2007

Standard Type: Industry standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Water supply and drainage projects

ICS Name: Drainage system

Publish Date: 2007-12-21

Implement Date: 2008-05-01

Pages: 17 pages

Scope

This standard specifies the terms and definitions, symbols, codes, materials, product structures, classifications, and connection methods of plastic-steel composite strips formed by extrusion of steel strips and polyethylene (medium or high density), and plastic-steel wrapped drainage pipes made by winding and welding. It also stipulates requirements, test methods, inspection rules, marking, transportation, and storage.
This pipe is suitable for long-term conveying of media with a temperature below 45°C in projects such as buried urban drainage, industrial drainage, and agricultural drainage.

Development Information

Word Count: 29 Thousand words Pages: 17 pages

Superseded by the following standards

CJ/T 270-2017 Steel reinforced spirally wound polyethylene(PE) drainage pipes and connecting piece

Referenced Standards

GB/T 6671-2001 Thermoplastics pipes-Determination of longitudinal reversion GB/T 14152-2001 Thermoplastics pipes—Determination of resistance to external blows—Round-the-clock method HG/T 3091 ISO 13968 GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium GB/T 716-1991 Cold-rolled carbon structural steel strips GB/T 1033-1986 Test method for density and relative density of plastics GB/T 1033.1-2008 Plastics—Methods for determining the density of non-cellular plastics—Part 1:Immersion method,liquid pyknometer method and titration method GB/T 1033.2-2010 Plastics—Methods for determining the density of non-cellular plastics—Part 2:Density gradient column method GB/T 1033.3-2010 Plastics—Methods for determining the density of non-cellular plastics—Part 3:Gas pyknometer method GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing GB/T 2918-2018 Plastics—Standard atmospheres for conditioning and testing GB/T 3280-1992 Cold rolled stainless steel sheets and plates GB/T 3280-2007 Cold rolled stainless steel plate, sheet and strip GB/T 3280-2015 Cold rolled stainless steel plate, sheet and strip GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 1:Standard method GB/T 3682.2-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 2:Method for materials sensitive to time-temperature history and/or moisture GB/T 6111-2003 Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure—Test method GB/T 6111-2018 Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure GB/T 8804.3-2003 Thermoplastic pipes—Determination of tensile properties—Part 3:Polyolefin pipes GB/T 9647-2003 Thermoplastics pipes—Determination of ring stiffness GB/T 9647-2015 Thermoplastics pipes—Determination of ring stiffness GB/T 17391-1998 Test method for thermal stability of polyethylene pipes and fittings GB/T 18042-2000 Thermoplastics pipes—Determination of creep ratio

Related Standards

CJ/T 225-2006 Replaced

CJ/T 225-2006 Metal reinforced Polyethylene (PE) spirally corrugated pipe for underground sewer

Publish Date: 2006-06-26

CJ/T 231-2006 Active

CJ/T 231-2006 Unplasticized polyvinyl chloride(PVC-U)and glass microsphere composite pipes for drainage

Publish Date: 2006-06-26

CJ/T 233-2006 Replaced

CJ/T 233-2006 Plastics inspection chambers for sewerage in building area

Publish Date: 2006-07-25

CJ/T 250-2007 Replaced

CJ/T 250-2007 High density polyethylene pipes and fittings for drainage inside buildings

Publish Date: 2007-03-08

CJ/T 273-2008 Replaced

CJ/T 273-2008 Polypropylene sound insulating pipes and fittings for drainage

Publish Date: 2008-04-02

CJ/T 278-2008 Active

CJ/T 278-2008 Polypropylene pipe and fitting for drainage inside buildings

Publish Date: 2008-06-03