CJ/T 225-2006
Replaced
CJ/T 273-2008
Replaced
Industry standards-Urban construction
CJ/T 273-2008 Polypropylene sound insulating pipes and fittings for drainage
CJ/T 273-2008 Polypropylene sound insulating pipes and fittings for drainage
Basic Information
Standard Code:
CJ/T 273-2008
Standard Type:
Industry standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Building water supply and drainage projects
ICS Name:
Drainage system
Publish Date:
2008-04-02
Implement Date:
2008-09-01
Pages:
24 pages
Scope
This standard specifies the product classification, materials, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of polypropylene silent drainage pipes and fittings.
This standard applies to polypropylene silent drainage pipes and fittings used for cold and hot drainage in buildings. Under the consideration of the material's chemical resistance and temperature resistance, it can also be used for industrial drainage pipes.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 1033-1986 Test method for density and relative density of plastics
QB/T 2803
HG/T 3091
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing
GB/T 2918-2018 Plastics—Standard atmospheres for conditioning and testing
GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 1:Standard method
GB/T 3682.2-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 2:Method for materials sensitive to time-temperature history and/or moisture
GB/T 6111-2003 Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure—Test method
GB/T 6111-2018 Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure
GB/T 6671-2001 Thermoplastics pipes-Determination of longitudinal reversion
GB/T 8801-2007 Test method for unplasticized polyvinyl chloride(PVC-U)fittings by falling
GB/T 8802-2001 Thermoplastics pipes and fitting-Determination of vicat softening temperature
GB/T 8803-2001 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C),acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings—Hot oven test method
GB/T 8806-2008 Plastics piping systems—Plastics components—Determination of dimensions
GB/T 9647-2003 Thermoplastics pipes—Determination of ring stiffness
GB/T 9647-2015 Thermoplastics pipes—Determination of ring stiffness
GB/T 14152-2001 Thermoplastics pipes—Determination of resistance to external blows—Round-the-clock method
SH/T 1541-2006 Hot-melt plastic particle appearance test methods
SH/T 1541.1-2019 Plastic particle appearance test method - Part 1: Visual method
GB/T 8806-1988 Method for dimension measuring of plastic pipes
Related Standards
CJ/T 231-2006
Active
CJ/T 231-2006 Unplasticized polyvinyl chloride(PVC-U)and glass microsphere composite pipes for drainage
CJ/T 233-2006
Replaced
CJ/T 233-2006 Plastics inspection chambers for sewerage in building area
CJ/T 250-2007
Replaced
CJ/T 250-2007 High density polyethylene pipes and fittings for drainage inside buildings
CJ/T 270-2007
Replaced
CJ/T 270-2007 Steel reinforced spirally wound Polyethylene(PE) drainage pipe
CJ/T 278-2008
Active