GB/T 13633-1992
Replaced
GB/T 21663-2008
Replaced
National standards
GB/T 21663-2008 Specific requirements for small capacity cylindrical rotor synchronous machines in energy save and environment protection projects
GB/T 21663-2008 Specific requirements for small capacity cylindrical rotor synchronous machines in energy save and environment protection projects
Basic Information
Standard Code:
GB/T 21663-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Synchronous motor
ICS Name:
Generator
Publish Date:
2008-04-23
Implement Date:
2008-12-01
Pages:
18 pages
Scope
This standard specifies the basic specifications, technical requirements, test and inspection items, as well as requirements for marking, packing, transportation, and storage of small-capacity energy-saving and environmentally friendly brushless synchronous generators. This standard applies to small-capacity energy-saving and environmentally friendly three-phase brushless synchronous generators with a capacity of 10 MVA or less. It supplements GB 755 "Rating and Performance of Rotating Machines". For matters not specified in this standard, they shall comply with the provisions of GB 755. For motors with a rated frequency of 60 Hz, they may refer to this standard for implementation. This standard can be used as a basis for technical agreements between the user and the manufacturer. For specific products, if there are special requirements, they may be agreed upon separately by the supplier and the buyer.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 10585
GB/T 20160-2006 Recommended practice for testing insulation resistance of rotating machinery
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB 755-2000 Rotating electrical machines—Rating and performance
GB/T 755-2008 Rotating electrical machines—Rating and performance
GB/T 755-2019 Rotating electrical machines—Rating and performance
GB/T 755.2-2003 Methods for determining losses and efficiency of rotating electrical machinery from tests(excluding machines for traction vehicles)
GB/T 1029-1993 Test procedures for three-phase synchronous machines
GB/T 1029-2005 Test procedures for three-phase synchronous machines
GB/T 1029-2021 Test procedures for three-phase synchronous machines
GB/T 10069.1-2006 Measurement of the airborne noise emitted by rotating electrical machines and the noise limits—Part 1:Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 11348.1-1999 Mechanical vibration of non-reciprocating machines—Measurements on rotating shafts and evaluation criteria—Part 1:General guidelines
GB/T 20835-2007 Guides for magnetization test of generator stator core
GB/T 20835-2016 Guides for magnetization test of generator stator core
GB/T 20835-2024 Guide for magnetization test of generator stator core
JB 6204-1992 The specification for voltage endurance test of stator insulation of large high-voltage alternating current motors
JB/T 7784-2006 The technical specification for the synchronous generator using an AC exciter motor for turbines
JB/T 8446-2013 Determination Method for Inter-turn Short-circuit of Rotors of Hidden Pole Synchronous Generators
JB/T 8991-1999 JB/T 8991-1999 Generator tin welding joint detection method
JB/T 6204-2002 The specification for insulation endurance voltage test of stator coils and windings of high-voltage alternating current motors
JB/T 7784-2024 Technical Specifications for AC Excitation Machines Used in Hidden Pole Synchronous Generators
JB/T 8446-2005 Determination Method for Inter-turn Short-circuit of Rotor of Hidden Pole Synchronous Generators
GB 50150-2016 Electric equipment installation engineering - standard for hand-over test of electric equipment
DL/T 596-1996 Electric equipment preventive testing regulations
JB/T 7784-1995 The technical specifications for the synchronous generator using an AC exciter motor for turbines
GB/T 755-2025 Rotating electrical machines—Rating and performance
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 1029-1993
Replaced
GB/T 1029-1993 Test procedures for three-phase synchronous machines
GB/T 4997-1993
Replaced
GB/T 4997-1993 Permanent magnet low speed direct current tachogenerator, General specification for
GB/T 7408-1994
Replaced
GB/T 7408-1994 Data elements and interchange formats—Information interchange—Representation of dates and times
GB/T 15548-1995
Replaced
GB/T 15548-1995 General specification for three-phase synchronous generator driven by reciprocating internal combustion engine
GB/T 7409.1-1997
Replaced