GB/T 16934-1997
Replaced
GB/T 16934-2013
Active
National standards
GB/T 16934-2013 Electric energy metering cubicle
GB/T 16934-2013 Electric energy metering cubicle
Basic Information
Standard Code:
GB/T 16934-2013
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Power supply and distribution engineering
ICS Name:
The power supply system
Publish Date:
2013-10-10
Implement Date:
2014-02-01
Pages:
23 pages
Scope
This standard specifies the technical and structural requirements, test items, and test methods for electrical energy metering cabinets.
This standard applies to high- and low-voltage integrated electrical energy metering cabinets of the same metal structure type, which are used in conjunction with power supply equipment and have a rated voltage of 0.38 kV to 35 kV and a rated current of 20 A to 1,000 A, as well as high- and low-voltage split electrical energy metering cabinets with a rated voltage of 0.38 kV to 750 kV.
Development Information
Replace the following standards
Referenced Standards
DL/T 448-2016 The Technical Management Regulations for Electric Energy Measurement Devices
DL/T 448-2000 Technical Management Regulations for Electric Energy Metering Equipment
DL/T 593-2016 Common technical requirements for high-voltage switchgear and control equipment standards
DL/T 593-2006 Common technical requirements for high-voltage switchgear and control equipment standards
JB/T 3085-1999
JB 5777.2-1991 Power system secondary circuit control and relay protection panel (counter) general technical specification
JB/T 5777.2-2002 General Technical Requirements for Control and Relay Protection Panels (Cabinets, Stations) for Secondary Electrical Systems
JJG 596-1999 Electrical Energy Meters with Electronics
JJG 596-2012 Electrical Meters for Measuring Alternating-current Electrical Energy
JJG 596-2026 Verification Regulation of Fixed Alternating-current Electrical Energy Meters
JJG 1021-2007 Instrument Transformers in Power System
Related Standards
GB 16895.5-2000
Replaced
GB 16895.5-2000 Electrical installations of buildings—Part 4:Protection for safety—Chapter 43:Protection against over current
GB 16895.6-2000
Replaced
GB 16895.6-2000 Electrical installations of buildings—Part 5:Selection and erection of electric equipment—Chapter 52:Wiring systems
GB 16895.7-2000
Replaced
GB 16895.7-2000 Electrical installations of buildings Part 7:Requirements for special installations or locations Section 704:Construction and demolition site installations
GB 16895.8-2000
Replaced
GB 16895.8-2000 Electrical installations of buildings—Part 7:Requirements for special installations or location—Section 706:Restrictive conducting locations
GB/T 16895.9-2000
Active