GB/T 2029-1980
Replaced
GB/T 11618.1-2008
Active
National standards
GB/T 11618.1-2008 Pipe fittings of copper and copper alloys—Part 1:Fittings of braze welding type
GB/T 11618.1-2008 Pipe fittings of copper and copper alloys—Part 1:Fittings of braze welding type
Basic Information
Standard Code:
GB/T 11618.1-2008
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Marine pipe fittings
ICS Name:
\n Piping system
Publish Date:
2008-08-04
Implement Date:
2009-02-01
Pages:
31 pages
Scope
This part of GB/T 11618 specifies the classification, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of brazed copper pipe fittings (hereinafter referred to as brazed fittings) in accordance with GB/T 18033 for copper pipe connections. This part applies to the design, manufacture, and acceptance of brazed fittings for copper pipelines with a nominal pressure not exceeding 1.6 MPa and a nominal diameter not exceeding DN 300 mm, used for the delivery of domestic water (cold water, hot water), drinking water, gas, and other media that do not corrode copper.
Development Information
Same series standard
Replace the following standards
Referenced Standards
GB/T 1176-1987 Specification for cast copper alloys
GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications
GB/T 2040-2002 Sheet of copper and copper alloy
GB/T 2059-2000 Strips of copper and copper alloys
GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 1:Parallel internal and taper external threads
GB/T 8619-1988 Method of the strength test for brazed and soldered seam
GB/T 18033-2007 Seamless copper tubes for water and gas
YS/T 649-2007 Extruded rod and bar of copper and copper alloys
《生活饮用水输配水设备及防护材料卫生安全评价规范》 卫生部卫法监发(2001)161号文附件2
《钢质海船入级规范》2006 第3分册 中国船级社
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 8888-2003 Wrought heavy non-ferrous metal products-Packing,marking,transporting and storing
GB/T 8888-2014 Wrough heavy non-ferrous metal products-packing,marking,transportation,storing and cetificate of quality
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 2030-1980
Replaced
GB/T 2030-1980 Bronze suction valve for seaward sluice
GB 3033-1982
Replaced
GB 3033-1982 Paint colors for marine pipes and their identification symbols
GB/T 1241-1983
Replaced
GB/T 1241-1983 Marine forged steel male thread stop and check valves
GB/T 594-1983
Replaced
GB/T 594-1983 Marine forged steel male thread stop valves
GB/T 595-1983
Replaced