GB/T 14225.2-1993 Replaced National standards

GB/T 14225.2-1993 Mouldboard plough—Technical requirements

GB/T 14225.2-1993 Mouldboard plough—Technical requirements

Publish Date: 1993-03-03 Implement Date: 1993-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 14225.2-1993

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Agricultural machinery and equipment

ICS Name: Farming machinery

Publish Date: 1993-03-03

Implement Date: 1993-10-01

Pages: 12 pages

Development Information

Word Count: 16 Thousand words Pages: 12 pages

Same series standard

GB/T 14225.1-1993 Mouldboard plough—Types and parameters GB/T 14225.3-1993 Mouldboard plough—Test method

Replace the following standards

GB 3963-1983

Superseded by the following standards

GB/T 14225-2008 Mouldboard plough

Referenced Standards

GB 1465 GB/T 1593.1-1996 Agricultural wheeled tractors—Rear-mounted three-point linkage—Part 1:Categories 1,2,3 and 4 GB/T 1593.2-2003 Agricultural wheeled tractors—Rear mounted three-point linkage—Part 2:category 1N(Narrow hitch) GB 1593.1~1593.3 NJ/Z 3 GB/T 699-1999 Quality carbon structural steels GB/T 699-2015 Quality carbon structure steels GB/T 700-1988 Carbon structural steels GB/T 700-2006 Carbon structural steels GB/T 711-1988 Hot-rolled quality carbon structural steel plates and wide strips GB/T 711-2008 Hot-rolled quality carbon structural steel plates、sheets and wide strips GB/T 711-2017 Hot-rolled quality carbon structural steel plates sheets and strips GB/T 1348-1988 Spheroidal graphite iron castings GB/T 1348-2009 Spheroidal graphite iron castings GB/T 1348-2019 Spheroidal graphite iron castings GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.2-2008 Sampling procedures for inspection by attributes—Part 2:Sampling plans indexed by limiting quality(LQ)for isolated lot inspection GB/T 2828.3-2008 Sampling procedures for inspection by attributes—Part 3:Skip-lot sampling procedures GB/T 2828.4-2008 Sampling procedures for inspection by attributes—Part 4:Procedures for assessment of declared quality levels GB/T 2828.5-2011 Sampling procedures for inspection by attributes—Part 5:System of sequential sampling plans indexed by acceptance quality limit(AQL)for lot-by-lot inspection GB/T 2828.10-2010 Sampling procedures for inspection by attributes—Part 10:Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes GB/T 2828.11-2008 Sampling procedures for inspection by attributes—Part 11:Procedures for assessment of declared quality levels for small population GB/T 9440-1988 Malleable iron castings GB/T 9440-2010 Malleable iron castings GB/T 11352-1989 Carbon steel castings for general engineering purposes GB/T 11352-2009 Carbon steel castings for general engineering purpose GB/T 14225.1-1993 Mouldboard plough—Types and parameters

Related Standards

GB/T 14225.1-1993 Replaced

GB/T 14225.1-1993 Mouldboard plough—Types and parameters

Publish Date: 1993-03-03

GB/T 14225.3-1993 Replaced

GB/T 14225.3-1993 Mouldboard plough—Test method

Publish Date: 1993-03-03

GB/T 5668.1-1995 Replaced

GB/T 5668.1-1995 Rotary tiller

Publish Date: 1995-11-16

GB/T 5668.3-1995 Replaced

GB/T 5668.3-1995 Rotary tiller—Testing methods

Publish Date: 1995-11-16

GB/T 5669-1995 Replaced

GB/T 5669-1995 Rotary tiller—Rotary blades and blade holders

Publish Date: 1995-11-16

GB 10395.5-1996 Replaced

GB 10395.5-1996 Tractors and machinery for agriculture and forestry—Technical means for ensuring safety—Part 5:Power-driven soil-working equipment

Publish Date: 1996-12-23