GB/T 35367-2017 Active National standards

GB/T 35367-2017 X-ray radiography technique and quality classification for titanium butt weld joints on submersible

Publish Date: 2017-12-29 Implement Date: 2018-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 35367-2017

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Ship materials and their inspection methods

ICS Name: Shipbuilding materials and parts

Publish Date: 2017-12-29

Implement Date: 2018-07-01

Pages: 9 pages

Scope

This standard specifies the basic requirements for personnel and equipment during X-ray radiography of titanium alloy welds in submersibles, as well as the X-ray penetration method and quality grading.
This standard applies to X-ray inspection of titanium alloy welds in deep-sea submersibles with an outer diameter of not less than 500 mm and a wall thickness of 5 mm to 110 mm. The X-ray radiography of other titanium alloy structural welds used in ships can be used for reference.

Development Information

Word Count: 16 Thousand words Pages: 9 pages

Referenced Standards

GB/T 19348.1-2014 Non-destructive testing—Industrial radiographic film—Part 1:Classification of film systems for industrial radiography GB/T 117-2000 Taper pins GB/T 9445-1999 Qualification and certification for nondestructive testing personnel GB/T 9445-2005 Non-destructive testing—Qualification and certification of personnel GB/T 9445-2008 Non-destructive testing—Qualification and certification of personnel GB/T 9445-2015 Non-destructive testing—Qualification and certification of NDT personnel GB 11533-1989 Standard logarithmic visual acuity charts GB/T 11533-2011 Standard for logarithmic visual acuity charts GB/T 12604.2-1990 Terminology for nondestructive testing Radiographic testing GB/T 12604.2-2005 Non-destructive testing—Terminology—Terms used in radiographic testing GB 18871-2002 Basic standards for protection against ionizing radiation and for the safety of radiation sources GB/T 9445-2024 Non-destructive testing—Qualification and certification of personnels JB/T 7902-2015 Nondamage detection line-type image quality meter general specification JB/T 7902-1999 Linear image meter JB/T 7902-2006 Non-destructive testing (NDT) and quality gauges for X-ray photography using linear type GB/Z 117.101-2026 Photovoltaic modules—Test methods for the detection of potential-induced degradation—Part 1-1:Crystalline silicon—Delamination

Related Standards

GB/T 10671-1989 Replaced

GB/T 10671-1989 Test method for specific optical density of smoke generated by solid materials

Publish Date: 1989-03-31

GB/T 10834-1989 Replaced

GB/T 10834-1989 Ship coatings—Determination of resistance to salt water—Salt water and hot salt water immersion method

Publish Date: 1989-03-31

GB/T 12900-1991 Replaced

GB/T 12900-1991 General terminology for ships—Shipbuilding material

Publish Date: 1991-05-11

GB/T 16167-1996 Replaced

GB/T 16167-1996 Technical conditions of lifeboat glass fiber reinforced plastics laminate

Publish Date: 1996-01-25

GB/T 552-1996 Abolished

GB/T 552-1996 Anchor chain casting steel

Publish Date: 1996-01-25

CB/T 3293-1997 Replaced

CB/T 3293-1997 Standard for the plate surface quality evalution and the repairs of surface's defects during shipbuilding

Publish Date: 1997-10-17