GB/T 2521-1996
Replaced
GB/T 14989-2015
Active
National standards
GB/T 14989-2015 Iron-cobalt-vanadium permanent-magnet alloys
GB/T 14989-2015 Iron-cobalt-vanadium permanent-magnet alloys
Basic Information
Standard Code:
GB/T 14989-2015
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Precision alloys
ICS Name:
Special magnetic steel
Publish Date:
2015-12-10
Implement Date:
2016-11-01
Pages:
8 pages
Scope
This standard specifies the grades, dimensions, shapes, and allowable deviations of iron-cobalt-vanadium permanent magnet alloys, as well as technical requirements, test methods, inspection rules, packaging, marking, and quality certificates. This standard applies to cold-drawn and cold-rolled strips of iron-cobalt-vanadium alloys used in the production of small-section permanent magnets and recording materials (hereinafter referred to as alloy materials).
Development Information
Replace the following standards
GB/T 14989-1994
Referenced Standards
GB/T 223.5-1997 Methods for chemical analysis of iron,steel and alloy—The reduced molybdosilicate spectro photometric method for the determination of acid-soluble silicon content
GB/T 223.5-2008 Steel and iron—Determination of acid-soluble silicon and total silicon content—Reduced molybdosilicate spectrophotometric method
GB/T 223.13-2000 Methods for chemical analysis of iron,steel and alloy The ammonium ferrous sulfate titration method for the determination of vanadium content
GB/T 223.20-1994 Methods for chemical analysis of iron,steel and alloy The potentiometric titration method for the determination of cobalt content
GB/T 223.23-1994 Methods for chemical analysis of iron, steel and alloy—The dimethylglyoxime spectrophotometric method for the determination of nickel content
GB/T 223.23-2008 Iron,steel and alloy—Determination of nickel content—The dimethylglyoxime spectrophotometric method
GB/T 223.62-1988 Methods for chemical analysis of iron,steel and alloy—The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.64-1988 Methods for chemical analysis of iron,steel and alloy—The flame atomic absorption spectrometric method forthe determination of manganese content
GB/T 223.64-2008 Iron,steel and alloy—Determination of manganese content—Flame atomic absorption spectrometric method
GB/T 223.68-1997 Methods for chemical analysis of iron,steel and alloy The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
GB/T 223.69-1997 Methods for chemical analysis of iron,steel and alloy The gas- volumetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.69-2008 Iron,steel and alloy—Determination of carbon contents—Gas-volumetric method after combustion in the pipe furnace
GB/T 11170-1989 Method for photoelectric emission spectroscopic analysis of stainless steel
GB/T 11170-2008 Stainless steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method(Routine method)
GB/T 13012-1991 Solid steels—Methods of measurement of the d.c. magnetic properties
GB/T 13012-2008 Methods of measurement of d.c.magnetic properties of magnetically soft materials
GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition
GB/T 20123-2006 Steel and iron—Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method)
YB/T 5242-2013 General regulations for packaging, labeling, and quality certificate of precision alloys
GB/T 223.13-2025 Iron,steel and alloy—Determination of vanadium content—Titrimetric method and spectrophotometric method
Related Standards
GB/T 17951.2-2002
Replaced
GB/T 17951.2-2002 Cold-rolled grain non-oriented electrical steel strip (sheet) delivered in the semi-processed state
GB/T 19345-2003
Replaced
GB/T 19345-2003 Amorphous and nanocrystalline soft magnetic alloy strips
GB/T 911-2004
Replaced
GB/T 911-2004 Dimensions,shapes,weight and tolerances for hot-rolled tool flat steels
GB/T 2521-2008
Active
GB/T 2521-2008 Cold-rolled grain-oriented and non-oriented electrical steel strip(sheet)
GB/T 6983-2008
Replaced