GB/T 3002-1982
Replaced
GB/T 2994-2021
Active
National standards
GB/T 2994-2021 High alumina refractory mortars
GB/T 2994-2021 High alumina refractory mortars
Basic Information
Standard Code:
GB/T 2994-2021
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
\nUnshaped refractory materials
ICS Name:
Fire-resistant materials
Publish Date:
2021-08-20
Implement Date:
2022-03-01
Pages:
5 pages
Scope
This document specifies the terms and definitions, classification and grades, technical requirements, test methods, quality assessment procedures, packaging, marking, transportation, storage, and quality certificates for high-alumina refractory mortars.
This document is applicable to refractory mortars with an alumina content of greater than or equal to 50% used for the masonry of high-alumina refractory bricks and corundum bricks.
Development Information
Replace the following standards
Referenced Standards
GB/T 4513.2-2017 Monolithic(unshaped) refractory products—Part 2:Sampling for testing
GB/T 5988-2004 Dense shaped refractory products—Determination of permanent changs in dimension on heating
GB/T 5988-2007 Refractory products—Determination of permanent change in dimension on heating
GB/T 5988-2022 Refractory products—Determination of permanent change in dimensions on heating
GB/T 6900-2006 Chemical analysis of alumina-silica refractories
GB/T 6900-2016 Chemical analysis of alumina-silica refractories
GB/T 6900.1-1986 Fireclay and high-alumina refractories—Determination of loss content on ignition—Gravimetric method
GB/T 6900.2-1986 Fireclay and high-alumina refractories—Determination of silicon dioxide content—Gravimetric-molybdenum blue photometric method
GB/T 6900.3-1986 Fireclay and high-alumina refractories—Determination of iron oxide content—o-Phenanthroline photometric method
GB/T 6900.4-1986 Fireclay and high-alumina refractories—Determination of aluminium oxide content—EDTA volumetric method
GB/T 6900.5-1986 Fireclay and high-alumina refractories—Determination of titanium dioxide content—Hydrogen peroxide photometric method
GB/T 6900.6-1986 Fireclay and high-alumina refractories—Determination of calcium oxide content—EDTA volumetric method
GB/T 6900.7-1986 Fireclay and high-alumina refractories—Determination of magnesium oxide content—Xylidyl blue Ⅰ-CTAB photometric method
GB/T 6900.8-1986 Fireclay and high-alumina refractories—Determination of calcium oxide and magnesium oxide content—Atomic absorption spectrophotometric method
GB/T 6900.9-1986 Fireclay and high-alumina refractories—Determination of potassium oxide and sodium oxide content—Atomic absorption spectrophotometric method
GB/T 6900.10-1986 Fireclay and high-alumina refractories—Determination of manganese oxide content—Ammonium persulfate photometric method
GB/T 6900.11-1986 Fireclay and high-alumina refractories—Determination of phosphorous pentoxide content—Molybdenum blue photometric method
GB/T 15545-1995 Unshaped refractory—Packing, marking, transportation and storage
GB/T 15545-2020 General rules for packing,marking,transport,storage and quality certificates of unshaped refractory
GB/T 21114-2007 Chemical analysis of refractory products by XRF—Fused cast bead method
GB/T 21114-2019 Refractories—Chemical analysis by X-ray fluorescence(XRF)—Fused cast-bead method
GB/T 22459.1-2008 Refractory mortars—Part 1:Determination of consistency using the penetrating cone method
GB/T 22459.1-2022 Refractory mortars—Part 1:Determination of consistency using the penetrating cone method
GB/T 22459.2-2008 Refractory mortars—Part 2:Determination of consistency using the reciprocating flow table method
GB/T 22459.2-2022 Refractory mortars—Part 2:Determination of consistency using the reciprocating flow table method
GB/T 22459.3-2008 Refractory mortars—Part 3:Determination of joint stability
GB/T 22459.3-2021 Refractory mortars—Part 3:Determination of joint stability
GB/T 22459.4-2008 Refractory mortars—Part 4:Determination of flexural bonding strength
GB/T 22459.4-2022 Refractory mortars—Part 4:Determination of flexural bonding strength
GB/T 22459.5-2008 Refractory mortars—Part 5:Determination of grain size distribution(sieve analysis)
GB/T 22459.5-2022 Refractory mortars—Part 5:Determination of grain size distribution(sieve analysis)
GB/T 22459.7-2008 Refractory mortars—Part 7:Determination of properties at elevated temperatures
GB/T 22459.7-2019 Refractory mortars—Part 7:Determination of other properties
YB/T 370-1995 Test method for refractoriness under load of refractory products(non-differential,with rising temperature)
YB/T 370-2016 The method of testing the weight-bearing softening temperature of refractory materials (non-differential-temperature-rise method)
GB/T 6900-2025 Chemical analysis of alumino-silicate refractories
Related Standards
GB/T 3994-1983
Replaced
GB/T 3994-1983 Shaped insulating refractory products—Fireclay bricks
GB/T 3995-1983
Replaced
GB/T 3995-1983 Shaped insulating refractory products—High alumina bricks
GB/T 3996-1983
Abolished
GB/T 3996-1983 Shaped thermal insulating products—Diatomite bricks and shapes
GB/T 4984-1985
Replaced
GB/T 4984-1985 Chemical analysis methods of zirconia-alumina refractories
GB/T 6900.9-1986
Replaced