GB/T 13871.1-2007 Replaced National standards

GB/T 13871.1-2007 Rotary shaft lip type seals incorporating elastomeric sealing elements—Part 1:Nominal dimensions and tolerances

Publish Date: 2007-12-13 Implement Date: 2008-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 13871.1-2007

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: \nRubber seals

ICS Name: Filter, sealing gasket, and fluid impurities

Publish Date: 2007-12-13

Implement Date: 2008-07-01

Pages: 11 pages

Scope

This part of GB/T 13871 specifies the nominal dimensions of rotary shaft labyrinth seals with elastomeric materials as the sealing elements; it defines six basic types of seals, the descriptions and illustrations of which are shown in Figure 1; in order to ensure the interchangeability of seals produced by different manufacturers, it also specifies the dimensional limits of the shaft and cavity; and it provides recommended tolerances for the basic dimensions of the seals. This part is applicable to rotary shaft labyrinth seals with a shaft diameter of 6 mm to 400 mm and a mating cavity of 16 mm to 440 mm, but it is not applicable to rotary shaft labyrinth seals used under higher pressures (>0.05 MPa).

Development Information

Word Count: 18 Thousand words Pages: 11 pages

Same series standard

GB/T 13871.4-2007 Rotary shaft lip type seals incorporating elastomeric sealing elements—Part 4:Performance test procedures

Replace the following standards

GB 13871-1992 Rotary shaft lip type seals—Nominal dimensions and tolerances

Superseded by the following standards

GB/T 13871.1-2022 Rotary shaft lip-type seals incorporating elastomeric sealing elements—Part 1:Dimensions and tolerances

Referenced Standards

GB/T 1031-1995 Surface roughness parameters and their values GB/T 1800.4-1999 Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts GB/T 5719-2006 Rubber sealing articles—Vocabulary GB/T 17446-1998 Fluid power systems and components—Vocabulary

Adopt standards

ISO 6194-1:1982

Related Standards

GB/T 17486-1998 Replaced

GB/T 17486-1998 Hydraulic fluid power—Filter—Evaluation of pressure drop versus flow characteristics

Publish Date: 1998-09-02

GB/T 14039-2002 Active

GB/T 14039-2002 Hydraulic fluid power—Fluids—Method for coding the level of contamination by solid particles

Publish Date: 2002-10-11

GB/T 18853-2002 Replaced

GB/T 18853-2002 Hydraulic fluid power filters—Multi-pass method for evaluating filtration performance of a filter element

Publish Date: 2002-10-11

GB/T 18854-2002 Replaced

GB/T 18854-2002 Hydraulic fluid power—Calibration of liquid automatic particle counters

Publish Date: 2002-10-11

GB/T 3452.1-2005 Active

GB/T 3452.1-2005 Fluid power systems—O-rings—Part 1:Inside diameters, cross-sections, tolerances and size identification code

Publish Date: 2005-07-11

GB/T 20082-2006 Active

GB/T 20082-2006 Hydraulic fluid power—Fluid contamination—Determination of particulate contamination by the counting method using an optical microscope

Publish Date: 2006-01-23