GB/T 19701.1-2024 Active National standards

GB/T 19701.1-2024 Implants for surgery—Ultra-high-molecular-weight polyethylene—Part 1:Powder form

GB/T 19701.1-2024 Implants for surgery—Ultra-high-molecular-weight polyethylene—Part 1:Powder form

Publish Date: 2024-11-28 Implement Date: 2025-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 19701.1-2024

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Orthopaedic surgery, orthopaedic instruments

ICS Name: Surgical implants, prostheses, and orthoses

Publish Date: 2024-11-28

Implement Date: 2025-12-01

Pages: 12 pages

Scope

This document specifies the requirements for ultra-high molecular weight polyethylene (PE-UHMW) powder used in surgical implants and describes the corresponding test methods.
This document is not applicable to products made from powder materials.

Development Information

Word Count: 11 Thousand words Pages: 12 pages

Same series standard

GB/T 19701.2-2024 Implants for surgery—Ultra-high-molecular-weight polyethylene—Part 2:Moulded forms GB/T 19701.3-2024 Implants for surgery—Ultra-high-molecular-weight polyethylene—Part 3:Accelerated ageing methods GB/T 19701.5-2024 Implants for surgery—Ultra-high-molecular-weight polyethylene—Part 5:Morphology assessment method

Replace the following standards

GB/T 19701.1-2016 Implants for surgery—Ultra-high-molecular-weight polyethylene—Part 1:Powder form

Referenced Standards

GB/T 1632.3-2010 Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometer—Part 3:Polyethylenes and polypropylenes GB/T 9345.1-2008 Plastics—Determination of ash—Part 1:General methods GB/T 21461.1-2008 Plastics—Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials—Part 1:Designation system and basis for specifications GB/T 21461.1-2023 Plastics—Ultra-high-molecular-weight polyethylene (PE-UHMW)moulding and extrusion materials—Part 1:Designation system and basis for specifications GB/T 21461.2-2008 Plastics—Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties GB/T 21461.2-2023 Plastics—Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties DIN 53474

Adopt standards

ISO 5834-1:2019

Related Standards

GB 12264-1990 Replaced

GB 12264-1990 Artificial heart-lung machine Silicon rubber pump tube

Publish Date: 1990-01-08

GB 12279-1990 Replaced

GB 12279-1990 Cardiac valve prostheses general technical specification

Publish Date: 1990-03-26

GB 12417-1990 Replaced

GB 12417-1990 The general technological conditions of surgical metal implant

Publish Date: 1990-07-17

GB/T 13461-1992 Replaced

GB/T 13461-1992 Synthetic resin blow knee prostheses

Publish Date: 1992-06-01

GB/T 14191-1993 Replaced

GB/T 14191-1993 Terminology for prosthetics and orthotics

Publish Date: 1993-02-25

GB 14722-1993 Replaced

GB 14722-1993 Endoskeletal above knee prosthesis

Publish Date: 1993-12-04