GB/T 22387-2016 Active National standards

GB/T 22387-2016 Residual current operated relay

GB/T 22387-2016 Residual current operated relay

Publish Date: 2016-08-29 Implement Date: 2017-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 22387-2016

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Low-voltage distribution electrical equipment

ICS Name: Fuses and other overload protection devices

Publish Date: 2016-08-29

Implement Date: 2017-03-01

Pages: 53 pages

Scope

This standard specifies the types, classifications, characteristics, markings, normal operating conditions, installation conditions, structure, performance requirements, test methods, and inspection rules for residual current operating relays (hereinafter referred to as residual current relays). The residual current relays specified in this standard are suitable for use in distribution lines with an AC rated voltage of 400 V or less, and are used to detect ground fault current in the line.

Development Information

Word Count: 100 Thousand words Pages: 53 pages

Replace the following standards

GB/T 22387-2008 Residual current operated relay

Referenced Standards

GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 4207-2012 Method for the determination of the proof and the comparative tracking indices of solid insulating materials GB 4824-2013 Industrial,scientific and medical(ISM) radio-frequency equipment—Disturbance characteristics—Limits and methods of measurement GB/T 5169.10-2006 Fire hazard testing for electric and electronic products—Part 10:Glow/hot-wire based test methods—Glow-wire apparatus and common test procedure GB/Z 6829-2008 General requirements for residual current operated protective devices GB/T 14048.1-2012 Low-voltage switchgear and controlgear—Part 1:General rules GB/T 14048.5-2008 Low-voltage switchgear and controlgear—Part 5-1:Control circuit devives and switching element—Electromechanical control circuit devices GB/T 16916.1-2014 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB)—Part 1:General rules GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.6-2008 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields

Related Standards

GB 13539.4-1992 Replaced

GB 13539.4-1992 Low-voltage fuses—Supplementary requirements for fuse-links for the protection of semiconductor devices

Publish Date: 1992-07-01

GB 13955-1992 Replaced

GB 13955-1992 Installation and operation of residual current operated protective devices

Publish Date: 1992-12-19

GB 14285-1993 Replaced

GB 14285-1993 Technical code for relaying protection and security automatic equipment

Publish Date: 1993-04-10

GB 14287-1993 Replaced

GB 14287-1993 Residual current operated alarm devices for fire prevention

Publish Date: 1993-04-10

GB 15166.2-1994 Replaced

GB 15166.2-1994 Alternating-current high-voltage fuses Current-limiting fuses

Publish Date: 1994-08-18

GB 15166.3-1994 Replaced

GB 15166.3-1994 Alternating-current high-voltage fuses Expulsion fuse

Publish Date: 1994-08-18