GB/T 32821-2016 Replaced National standards

GB/T 32821-2016 Gas turbine applications—Safety

GB/T 32821-2016 Gas turbine applications—Safety

Publish Date: 2016-08-29 Implement Date: 2017-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 32821-2016

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Gas turbines and their auxiliary equipment

ICS Name: Gas turbines, steam turbines, and steam engines

Publish Date: 2016-08-29

Implement Date: 2017-03-01

Pages: 76 pages

Scope

This standard specifies the safety requirements for gas turbines of various types using liquid or gaseous fuels, intended for land and sea use, including floating platforms, with open-cycle (simple, combined, heat recovery, reheat, etc.) configurations, as well as related control and detection systems and necessary auxiliary facilities.
This standard details the major hazards associated with gas turbines and outlines preventive measures and processes to reduce or eliminate these hazards. The standard addresses risks to human health and environmental harm, but does not cover equipment damage unrelated to health or environmental hazards.
This standard applies to drive machinery (such as gearboxes) directly connected to gas turbines, or located within the turbine casing and forming part of the hazardous area of the casing (e.g., generators located within the casing), or drive equipment that directly affects the safe operation of gas turbines.
Gas turbine generator sets are typically specified using international and national standards. Safety requirements are enhanced through the application of additional general safety regulations. It should be noted that this standard does not cover local regulatory requirements for equipment use.
This standard specifies the safety requirements for gas turbines from an international perspective, based on existing certified ISO and IEC standards, to the greatest extent possible. For aspects not covered by ISO or IEC standards, other specifications or standards (e.g., EN, NFPA, etc.) are used. If local or national regulations accept alternative specifications or standards or stipulate equivalent risk levels for international or national standards, these alternative specifications or standards may replace the normative references in Chapter 2.
This standard does not apply to gas turbines primarily used for direct and indirect drive, those using special heat sources, or those in the developmen

Development Information

Word Count: 134 Thousand words Pages: 76 pages

Superseded by the following standards

GB/T 32821-2025 Gas turbine applications—Safety

Referenced Standards

GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 5169.2-2002 Fire hazard testing for electric and electronic products—Part 2:Guidance for assessing the fire hazard—General guidelines GB 5226.1-2008 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements GB 5226.3-2005 Safety of machinery—Electrical equipment of machines—Part 11:Requirements for HV equipment for voltages above 1 000 Va.c. or 1 500 Vd.c. and not exceeding 36 kV GB/T 5332-2007 Method of test for ignition temperature of flammable liquids and gases GB/T 7932-2003 Pneumatic fluid power—General rules relating to systems GB/T 14099.3-2009 Gas turbines—Procurement—Part 3:Design requirements GB/T 14099.9-2006 Gas turbines-procurement—Part 9:Reliability,availability,maintainability and safety GB/T 15706.1-2007 Safety of machinery—Basic concepts, general principles for design—Part 1:Basic terminology, methodology GB/T 15706.2-2007 Safety of machinery—Basic concepts, general principles for design—Part 2:Technical principles GB/T 16856.1-2008 Safety of machinery—Risk assessment—Part 1:Principles GB/T 19074-2003 Industrial fans—Mechanical safety of fans—Guarding GB/T 20438.1-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 1:General requirements GB/T 21109.1-2007 Functional safety—Safety instrumented systems for the process industry sector—Part 1:Framework,definitions,system,hardware and software requirements GB/T 23819-2009 Safety of machinery—Fire prevention and protection GB/T 24001-2004 Environmental management systems—Requirements with guidance for use ISO 3977-1:1997 ISO 4413:1998 ISO 4871:1996 ISO 6183:1990 ISO 10441:2007 ISO 10494:1993 ISO 11086:1996 ISO/TR 13387-7:1999 ISO 14118:2000 ISO 14120:2002 ISO 14123-1:1998 ISO 14520-1:2006 ISO 14691:2008 IEC 60079-0:2007 IEC 60079-10 IEC 60079-14:2007 IEC 60079-17:2007 IEC/TR 60079-20:1996 IEC 60079-20-1:201 IEC 60079-29-1:2007 IEC 60079-29-2:2007 IEC/TR 61000-5-1:1996 IEC/TR 61000-5-2:1997 IEC 61000-6-2:2005 IEC 61000-6-4:2006 EN 1127-1:2007 EN 13463-1:2001 EN 50272-2:2001 NFPA 12:2008 NFPA 13:2007 NFPA 15:2007 NFPA 68:2007 NFPA 750:2006 NFPA 2001:2008

Adopt standards

ISO 21789:2009

Related Standards

GB/T 4773-1984 Replaced

GB/T 4773-1984 Parameters of steam turbines in conventional combined heating and power stations

Publish Date: 1984-11-27

GB/T 5578-1985 Replaced

GB/T 5578-1985 Specification for stationary steam turbines driving generator

Publish Date: 1985-11-04

GB/T 11369-1989 Replaced

GB/T 11369-1989 Light weight gas turbines exhaust smokes measurement

Publish Date: 1989-06-22

GB/T 11370-1989 Replaced

GB/T 11370-1989 Gas emissions measurement of light weight gas turbines

Publish Date: 1989-06-22

GB/T 11371-1989 Replaced

GB/T 11371-1989 Light weight gas turbine operation and maintenance

Publish Date: 1989-06-22

GB/T 13399-1992 Replaced

GB/T 13399-1992 Specification for steam turbine safety monitoring devices

Publish Date: 1992-02-17