GB/T 18241.2-2000
Active
T/CRIA 18002-2019
Active
Group standards
T/CRIA 18002-2019 Parking wedge
T/CRIA 18002-2019 Parking wedge
Price:
$ 24.00
Basic Information
Standard Code:
T/CRIA 18002-2019
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Other rubber products
ICS Name:
Other rubber and plastic products
Publish Date:
2019-12-27
Implement Date:
2020-01-01
Pages:
16 pages
Scope
This standard specifies the terms and definitions of parking wedges, product specifications, technical requirements, test methods, inspection rules, factory marking, packaging, transportation, and storage. The parking wedges specified in this standard are applicable to buses with a length of not less than 6 m and trucks with a total mass of 3,500 kg to 30,000 kg, for parking on asphalt or concrete pavements with a slope of less than 20% and an ambient temperature range of -40°C to 80°C. Parking wedges used for other vehicles can refer to this standard. This standard applies to parking wedges made of rubber materials, and parking wedges made of other materials can also refer to this standard for implementation.
Development Information
Referenced Standards
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 529-1999 Rubber,vulcanized or thermoplastic—Determination of tear strength (Trouser,angle and crescent test pieces)
GB/T 529-2008 Rubber,vulcanized or thermoplastic—Determination of tear strength(Trouser,angle and crescent test pieces)
GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness)
GB/T 3512-2001 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 3512-2014 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 5721-1993 General rules of identification, packaging, transportation and storage for rubber sealing products
GB/T 7758-2002 Rubber,vulcanized—Determination of low-temperature characteristics—Temperature-retraction procedure(TR test)
GB/T 7758-2020 Rubber, vulcanized—Determination of low-temperature characteristics—Temperature-retraction procedure (TR test)
GB/T 7759.1-2015 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1:At ambient or elevated temperatures
GB/T 7762-2003 Rubber, vulcanized or thermoplastic—Resistance to ozone cracking—Static strain test
GB/T 7762-2014 Rubber,vulcanized or thermoplastic—Resistance to ozone cracking—Static strain testing
GB/T 9881-2003 Rubber—Vocabulary
GB/T 9881-2008 Rubber—Vocabulary
HG/T 3090-1987 General rules of visual quality for moulded and extruded rubber products
GB/T 9881-2026 Rubber—Vocabulary
Related Standards
GB/T 18241.3-2000
Replaced
GB/T 18241.3-2000 Rubber Iining—Part 3-Lining for floatation machine
GB 18241.1-2001
Replaced
GB 18241.1-2001 Rubber lining—Part 1 Anticorrosion lining for equipment
GB/T 20029-2005
Active
GB/T 20029-2005 Rubber isolation bearings for instruments and equipments
GB/T 18241.4-2006
Active
GB/T 18241.4-2006 Rubber lining—Part 4:Anticorrosion lining for flue gas desulfurization
GB 18173.1-2006
Replaced