GB/T 6374-1986
Replaced
GB 25527-2010
Active
National standards
force_standard
GB 25527-2010 Mine site mixed and charged explosive trucks—Safety requirements
GB 25527-2010 Mine site mixed and charged explosive trucks—Safety requirements
Basic Information
Standard Code:
GB 25527-2010
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
yes
CCS Name:
Mining equipment
ICS Name:
Drilling and excavation equipment
Publish Date:
2010-12-01
Implement Date:
2011-10-01
Pages:
7 pages
Development Information
Referenced Standards
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB 50089-2007
《民用爆破器材专用生产设备安全使用年限管理规定》 国防科工委(2007年)
《汽车报废标准》 经贸委等(1997年)
GB 1251.1-1989 Danger signals for work places—Auditory danger signals
GB/T 1251.1-2008 Ergonomics—Danger signals for public and work areas—Auditory danger
GB 1589-2004 Limits of dimensions, axle load and masses for road vehicles
GB 1589-2016 Limits of dimensions,axle load and masses for motor vehicles,trailers and combination vehicles
GB/T 3766-2001 Hydraulic fluid power—General rules relating to systems
GB/T 3766-2015 Hydraulic fluid power—General rules and safety requirements for systems and their components
GB 5226.1-2002 Safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB 5226.1-2008 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 9969-2008 General principles for preparation of instructions for use of industrial products
GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
GB/T 13306-1991 Plates
GB/T 13306-2011 Plates
GB 13365-1992 The performance requirements and test methods for exhaust spark arrester of vehicle
GB 13365-2005 Spark arrester
GB/T 15706.1-1995 Safety of machinery—Basic concept, general principles for design—Part 1:Basic terminology, methodology
GB/T 15706.1-2007 Safety of machinery—Basic concepts, general principles for design—Part 1:Basic terminology, methodology
GB/T 15706.2-1995 Safety of machinery—Basic concepts, general principles for design—Part 2:Technical principles and specifications
GB/T 15706.2-2007 Safety of machinery—Basic concepts, general principles for design—Part 2:Technical principles
GB 16423-1996 Safety regulations for metal and nonmetal opencast mines
GB 16423-2006 Safety regulations for metal and nonmetal mines
GB 16423-2020 Safety regulation for metal and nonmetal mines
GB 17888.2-1999 Safety of machinery—Permanent means of access to machines and industrial plants—Part 2:Working platforms and gangways
GB/T 17888.2-2008 Safety of machinery—Permanent means of access to machinery—Part 2:Working platforms and walkways
GB/T 17888.2-2020 Safety of machinery—Permanent means of access to machinery—Part 2:Working platforms and walkways
GB 17888.3-1999 Safety of machinery—Permanent means of access to machines and industrial plants—Part 3:Stairways,stepladders and guard-rails
GB/T 17888.3-2008 Safety of machinery—Permanent means of access to machinery—Part 3:Stairs,stepladders and guard-rails
GB/T 17888.3-2020 Safety of machinery—Permanent means of access to machinery—Part 3:Stairs,stepladders and guard-rails
JT/T 230-2021 Car static eliminator rubber traction strap
JT/T 230-1995 Rubber belt of electrostatic conductivity for motor vehicle
Related Standards
GB/T 9151-1988
Replaced
GB/T 9151-1988 Terms of drilling engineering
GB/T 12761-1991
Replaced
GB/T 12761-1991 Raise-boring machines
GB/T 13343-1992
Replaced
GB/T 13343-1992 Blast hole tricone rock bits
GB/T 13344-1992
Replaced
GB/T 13344-1992 Downhole drill hammers and bits
GB/T 14446-1993
abolished_transferred