GB/T 2625-1981
Active
T/CCMA 0087-2020
Active
Group standards
T/CCMA 0087-2020 Full-face tunnel boring machine condition monitoring and evaluation
T/CCMA 0087-2020 Full-face tunnel boring machine condition monitoring and evaluation
Price:
$ 47.00
Basic Information
Standard Code:
T/CCMA 0087-2020
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Industrial automation instrumentation and control devices
ICS Name:
The measurement and control of industrial processes
Publish Date:
2020-01-21
Implement Date:
2020-04-21
Pages:
40 pages
Scope
This standard specifies the terms and definitions, general requirements for status monitoring and assessment, and evaluation reports for the status monitoring and assessment of full-face tunnel boring machines. This standard applies to the status monitoring and assessment of full-face tunnel boring machines.
Development Information
Referenced Standards
GB/T 260-2016 Test method for water in petroleum products—Distillation method
GB/T 264-1983 Petroleum products—Determination of acid number
GB/T 265-1988 Petroleum products—Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 510-1983 Petroleum products—Determination of solidification point
GB/T 510-2018 Determination of solidification point for petroleum products
GB/T 511-1988 Petroleum products and additives—Determination of mechanical impurities—Gravimetric method
GB/T 511-2010 Petroleum,petroleum products and additives—Method for determination of mechanical admixtures
GB/T 3535-1983 Petroleum oils—Determination of pour point
GB/T 3535-2006 Petroleum products—Determination of pour point
GB/T 3536-1983 Petroleum products—Determination of flash and fire points—Cleveland open cup method
GB/T 3536-2008 Petroleum products—Determination of flash and fire points—Cleveland open cup method
GB/T 4929-1985 Lubricating grease—Determination of dropping point
GB/T 13200-1991 Water quality—Determination of turbidity
GB/T 17476-1998 Standard test method for determination of additive elements,wear metals,and contaminants in used lubricanting oils and determination of selected elements in base oils by inductively coupled plasma atomic emission spectrometry(ICP-AES)
GB/T 17476-2023 Determination of multielements of lubricating oils and base oils—Inductively coupled plasma atomic emission spectrometry(ICP-AES)
GB/T 34354-2017 Full face tunnel boring machine—Terms and commercial specification
DZ/T 0064.5-2021 Groundwater Quality Analysis Method Part 5: Determination of pH using Glass Electrode Method
DZ/T 0064.5-1993 Testing methods for groundwater quality: Glass electrode method for determining pH value
DZ/T 0064.8-1993 Groundwater quality testing method: Determination of suspended solids
DZ/T 0064.15-1993 Groundwater quality determination method: Bismuthate method for determination of hardness using disodium EDTA titration
SH/T 0573-1993 Sh/T 0573-1993 Wear Particle Test Method for Lubricating Oil in Use (Analytical Iron Spectrometry)
T/CCMA 0031-2015 Drilling machinery group classification, terminology, and definitions
ISO 4406
ISO 10816-3
GB/T 3535-2025 Determination of pour point for petroleum products
Related Standards
GB/T 4830-1984
Replaced
GB/T 4830-1984 Pressure range and quality of air supply for the industrial process measurement and control instruments
GB/T 5692-1985
Abolished
GB/T 5692-1985 Definitions of CAMAC terms
GB/T 5693-1985
Abolished
GB/T 5693-1985 CAMAC organization of multi-crate systems specification of the branch-highway and CAMAC crate controller type A1
GB/T 5694-1985
Abolished
GB/T 5694-1985 Block transfers in CAMAC systems
GB/T 5691-1985
Abolished