GB/T 33322-2016
Active
National standards
GB/T 33322-2016 Rubber plasticizer—Aromatic base mineral oil
GB/T 33322-2016 Rubber plasticizer—Aromatic base mineral oil
Basic Information
Standard Code:
GB/T 33322-2016
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Chemical auxiliaries
ICS Name:
Rubber synthetic ingredients
Publish Date:
2016-12-13
Implement Date:
2017-07-01
Pages:
6 pages
Scope
This standard specifies the marking, technical requirements, inspection rules, and packaging, labeling, storage, transportation, and delivery acceptance of aromatic mineral oil rubber plasticizers. This standard applies to aromatic mineral oil-based rubber plasticizers produced from natural petroleum. The products covered by this standard are suitable for use in rubber synthesis such as styrene-butadiene rubber (SBR), butadiene rubber (BR), isoprene rubber (IR), etc., as well as for plasticizing and softening rubber tires. If the products covered by this standard are used outside the above-mentioned scope, it is recommended that users conduct selective tests before use.
Development Information
Referenced Standards
SN/T 1877.3-2007
GB/T 260-2016 Test method for water in petroleum products—Distillation method
GB/T 262-1988 Petroleum products—Determination of aniline point
GB/T 262-2010 Petroleum products and hydrocarbon solvents—Determination of aniline point and mixed aniline point
GB/T 265-1988 Petroleum products—Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 511-1988 Petroleum products and additives—Determination of mechanical impurities—Gravimetric method
GB/T 511-2010 Petroleum,petroleum products and additives—Method for determination of mechanical admixtures
GB/T 1884-2000 Crude petroleum and liquid petroleum products—Laboratory determination of density—Hydrometer method
GB/T 1885-1998 Petroleum measurement tables
GB/T 3535-1983 Petroleum oils—Determination of pour point
GB/T 3535-2006 Petroleum products—Determination of pour point
GB/T 3536-1983 Petroleum products—Determination of flash and fire points—Cleveland open cup method
GB/T 3536-2008 Petroleum products—Determination of flash and fire points—Cleveland open cup method
GB/T 4756-1998 Petroleum liquids—Manual sampling
GB/T 4756-2015 Method for manual sampling of petroleum liquids
GB/T 4945-2002 Standard test method for acid and base number of petroleum products and lubricants by Colour-indicator titration
GB/T 6540-1986 Petroleum products—Determination of colour
GB/T 17040-1997 Petroleum products—Determination of sulfur—Energy-dispersive X-ray fluorescence spectroscopy
GB/T 17040-2008 Standard test method for sulfur in petroleum and petroleum products by energy dispersive X-ray fluorescence spectrometry
GB/T 17040-2019 Determination of sulfur in petroleum and petroleum products—Energy dispersive X-ray fluorescence spectrometry
SH/T 0689-2000 Standard test method for determination of total sulfur in light hydrocarbons,motor fuels and oils by ultraviolet fluorescence
NB/SH/T 0835-2010 The viscosity of heavy fractions of petroleum (VGC) calculation method
NB/SH/T 0838-2010 Determination of PCA content in unused lubricant base oil and asphaltene-free petroleum fractions using n-butanol extraction and refractive index method
SH 0164-1992 Rules for packaging, storage, transportation, and acceptance of petroleum products
SH/T 0724-2002 The Refractive Index and Dispersion of Liquid Hydrocarbons Determination Method
SH/T 0725-2002 SH/T 0725-2002 Petroleum-based insulating oil carbon composition calculation method
SH/T 0729-2004 The method for calculating the carbon distribution and structural group composition of petroleum fractions (n-d-M method)
GB/T 3535-2025 Determination of pour point for petroleum products
GB/T 6540-2025 Determination for colour of petroleum products
Related Standards
GB/T 11409.4-1989
Replaced
GB/T 11409.5-1989
Replaced
GB/T 11409.5-1989 Test method of residue on sieve for rubber antiagers and vulcanizing accelerators
GB/T 11409.7-1989
Replaced
GB/T 11409.7-1989 Test method of ash for rubber antiagers and vulcanizing accelerators
GB/T 11409.8-1989
Replaced
GB/T 11409.8-1989 Test method of viscosity for rubber antiagers and vulcanizing accelerators—Rotational viscometer method
GB/T 12827-1991
Replaced
GB/T 12827-1991 Standard reference acetylene black and standard practice for evaluation
GB/T 13021-1991
Replaced