GB/T 37805-2019
Active
National standards
GB/T 37805-2019 Bamboo winding composite pipe
GB/T 37805-2019 Bamboo winding composite pipe
Basic Information
Standard Code:
GB/T 37805-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Plywood
ICS Name:
Other wood-based boards
Publish Date:
2019-08-30
Implement Date:
2020-03-01
Pages:
34 pages
Scope
This standard specifies the terms and definitions, classification and marking, raw materials, technical requirements, test methods, inspection rules, factory certificates, packaging, transportation, storage, etc. of bamboo-wrapped composite pipes (hereinafter referred to as bamboo composite pipes). This standard applies to bamboo-wrapped composite pipes with a nominal inner diameter of 150 mm to 3,000 mm, a pressure rating of no more than 1.6 MPa, a ring stiffness rating of 5,000 N/m2 to 20,000 N/m2, an application environment temperature of -40 °C to 80 °C, and a maximum transport medium temperature of no more than 90 °C, used in water conservancy, municipal, and industrial water supply and drainage projects.
Development Information
Referenced Standards
GB/T 1446-2005 Fiber-reinforced plastics composites—The generals for determination of properties
GB/T 1447-2005 Fiber-reinforced plastics composites—Determination of tensile properties
GB/T 1725-2007 Paints,varnishes and plastics—Determination of non-volatile-matter content
GB/T 2567-2008 Test methods for properties of resin casting boby
GB/T 2794-2013 Determination for viscosity of adhesives—Single cylinder rotational viscometer method
GB/T 2895-2008 Plastics—Polyester resin—Determination of partial acid value and total acid value
GB/T 7689.2-2013 Reinforcements—Test method for woven fabrics—Part 2:Determination of number of yarns per unit length of warp and weft
GB 8624-2012 Classification for burning behavior of building materials and products
GB/T 9914.1-2013 Test method for reinforcement products—Part 1:Determination of moisture content
GB/T 9914.3-2013 The method for reinforcement products—Part 3:Determination of mass per unit area
GB/T 14074-2017 Testing methods for wood adhesives and their resins
GB/T 24148.7-2014 Plastics—Unsaturated polyester resins—Part 7:Measurement of gel time at ambient temperature
GB/T 24218.2-2009 Textiles—Test methods for nonwovens—Part 2:Determination of thickness
GB/T 24218.3-2010 Textiles—Test methods for nonwovens—Part 3:Determination of tensile strength and elongation(strip method)
GB/T 24218.18-2014 Textiles—Test methods for nonwovens—Part 18:Determination of breaking strength and elongation (grab method)
GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness)
GB/T 1034-1998 Plastics—Determination of water absorption
GB/T 1034-2008 Plastics—Determination of water absorption
GB/T 1449-2005 Fibre-reinforced plastic composites—Determination of flexural properties
GB/T 1458-1988 Test method for tensile strength of ring of filament-winding reinforced plastics
GB/T 1458-2008 Test method for mechanical properties of ring of filament-winding reinforced plastics
GB/T 1458-2023 Test method for mechanical properties of ring of filament-winding reinforced composites
GB/T 2576-1989 Test method for insoluble matter content of resin used in fiber reinforced plastics
GB/T 2576-2005 Test method for insoluble matter content of resin used in fiber reinforced plastics
GB/T 3139-1982 Test method for thermal conductivity of glassfiber reinforced plastics
GB/T 3139-2005 Fiber-reinforced plastics composites—Determination of thermal conductivity
GB/T 4380-2004 Assessment of departure from roundness—Two-and three-point methods
GB/T 5351-1985 Test method for short-time hydraulic failure pressure of fiber-reinforced thermosetting plastic pipe
GB/T 5351-2005 Fiber-reinforced thermosetting plastic composites pipe—Determination of short-time hydraulic failure pressure
GB/T 5352-1985 Test method for external loading properties of fiber-reinforced thermosetting plastic pipe by parallel-plate loading
GB/T 5352-2005 Fiber-reinforced thermosetting plastic composites pipe—Determination for external loading properties by parallel-plate loading
GB/T 8626-1988 Test method of flammability for building materials
GB/T 8626-2007 Test method of flammability for building materials
GB/T 17219-1998 Standard for safety evaluation of equipment and protective materials in drinking water system
GB/T 20284-2006 Single burning item test for building materials and products
GB/T 17219-2025 Hygienic safety evaluation of distribution equipment,protective materials and treatment materials in drinking water system
GB/T 8626-2026 Test method of flammability for building materials
GB/T 20284-2026 Single burning item test for building material and product
Related Standards
LY/T 1795-2008
Replaced
LY/T 1278-2011
Active
LY/T 1278-2011 Laminated wood for electrical purposes
GB/T 26899-2011
Replaced
GB/T 26899-2011 Structural glued laminated timber
GB/T 28998-2012
Active
GB/T 28998-2012 Multilaminar decorative lumber
GB/T 28999-2012
Active
GB/T 28999-2012 Multilaminar decorative veneer
LY/T 1401-2013
Active