GB/T 6418-1993
Replaced
GB/T 38265.3-2022
Active
National standards
GB/T 38265.3-2022 Test methods for soft soldering fluxes—Part 3:Determination of acid value—Potentiometric and visual titration methods
GB/T 38265.3-2022 Test methods for soft soldering fluxes—Part 3:Determination of acid value—Potentiometric and visual titration methods
Basic Information
Standard Code:
GB/T 38265.3-2022
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Welding and cutting
ICS Name:
\nBrazing and low-temperature welding
Publish Date:
2022-10-12
Implement Date:
2022-10-12
Pages:
13 pages
Scope
This document specifies the determination methods of the acid value of fluxes—potentiometric titration and visual titration, including the principles, reagents, instruments and equipment, experimental steps, experimental data processing, precision, and experimental reports, etc.
This document is applicable to Type 1 and Type 2 fluxes defined in GB/T 15829.
Development Information
Same series standard
GB/T 38265.6-2022 Test methods for soft soldering fluxes—Part 6: Determination of halide(excluding fluoride) content
GB/T 38265.8-2022 Test methods for soft soldering fluxes—Part 8:Determination of zinc content
GB/T 38265.9-2022 Test methods for soft soldering fluxes—Part 9:Determination of ammonia content
GB/T 38265.17-2022 Test methods for soft soldering fluxes—Part 17:Surface insulation resistance comb test and electrochemical migration test of flux residues
Referenced Standards
GB/T 6379.2-2004 Accuracy(trueness and precision)of measurement methods and results—Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 6379.3-2004
GB/T 6379.4-2006 Accuracy (trueness and precision) of measurement methods and results—Part 4:Basic methods for the determination of the trueness of a standard measurement method
GB/T 6379.5-2006 Accuracy (trueness and precision) of measurement methods and results—Part 5:alternative methods for the determination of the precision of a standard measurement method
GB/T 6379.6-2004
GB/T 678-2002 Chemical reagent—Ethanol
GB/T 678-2023 Chemical reagent—Ethanol
GB/T 684-1999 Chemical reagent-Toluene
GB/T 684-2023 Chemical reagent—Toluene
GB/T 6379-1986 Precision of test methods Determination of repeatability and reproducibility for a standard test method by interlaboratory tests
GB/T 6379.1-2004 Accuracy(trueness and precision)of measurement methods and results—Part 1:General principles and definitions
GB/T 6379.2-2004 Accuracy(trueness and precision)of measurement methods and results—Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 6379.3-2012 Accuracy(trueness and precision)of measurement methods and results—Part 3:Intermediate measures of the precision of a standard measurement method
GB/T 6379.4-2006 Accuracy (trueness and precision) of measurement methods and results—Part 4:Basic methods for the determination of the trueness of a standard measurement method
GB/T 6379.5-2006 Accuracy (trueness and precision) of measurement methods and results—Part 5:alternative methods for the determination of the precision of a standard measurement method
GB/T 6379.6-2009 Accuracy(trueness and precision)of measurement methods and results—Part 6:Use in practice of accuracy values
GB/T 38265.1-2019 Test methods for soft soldering fluxes—Part 1:Determination of non-volatile matter—Gravimetric method
GB/T 38265.2-2019 Test methods for soft soldering fluxes—Part 2:Determination of non-volatile matter—Ebulliometric method
HG/T 2892-2020 HG/T 2892-2020 Chemical reagent isopropanol
HG/T 2892-2010 chemistry reagents, isopropyl alcohol
HG/T 2892-1997 HG/T 2892-1997 Chemical reagent Isopropyl alcohol
GB/T 6379.4-2025 Accuracy(trueness and precision)of measurement methods and results—Part 4:Basic methods for the determination of the trueness of a standard measurement method
Adopt standards
ISO 9455-3:2019
Related Standards
GB/T 10046-2000
Replaced
GB/T 10046-2000 Silver filler metals for brazing
GB/T 8012-2000
Replaced
GB/T 8012-2000 Casting tin-lead solders
GB/T 3131-2001
Replaced
GB/T 3131-2001 Tin-lead solder
GB/T 19418-2003
Active
GB/T 19418-2003 Arc-welded joints in steel—Guidance on quality levels for imperfections
GB/T 20422-2006
Replaced