GB/T 2843-1981
Abolished
GB/T 7190.3-2019
Active
National standards
GB/T 7190.3-2019 Mechanical draft cooling towers—Part 3:Closed circuit cooling towers
GB/T 7190.3-2019 Mechanical draft cooling towers—Part 3:Closed circuit cooling towers
Price:
$ 93
Basic Information
Standard Code:
GB/T 7190.3-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Fiber-reinforced composites
ICS Name:
Enhanced plastics
Publish Date:
2019-08-30
Implement Date:
2020-07-01
Pages:
26 pages
Scope
This part of GB/T 7190 specifies the product classification and marking, requirements, test methods, inspection rules, marking, packaging, transportation and storage, and other aspects of closed cooling towers.
This part is applicable to closed cooling towers (hereinafter referred to as closed towers) with a single tower circulation cooling water volume not exceeding 500 m3/h.
Development Information
Referenced Standards
GB 151-1999 Tubular heat exchangers
GB/T 151-2014 Heat exchangers
GB/T 1449-2005 Fibre-reinforced plastic composites—Determination of flexural properties
GB/T 2518-1988 Continual hot-dip zinc-coated steel sheets and strips
GB/T 2518-2004 Continuous hot-dip zinc-coated steel sheets and strips
GB/T 2518-2008 Continuously hot-dip zinc-coated steel sheet and strip
GB/T 2518-2019 Continuously hot-dip zinc and zinc alloy coated steel sheet and strip
GB/T 7190.1-1997 Glass fiber reinforced plastic cooling tower—Part 1:Middle and small glass fiber reinforced plastic cooling tower
GB/T 7190.1-2008 Glass fiber reinforced plastic cooling tower—Part 1:Middle and small glass fiber reinforced plastic cooling tower
GB/T 7190.1-2018 Mechanical draft cooling towers—Part 1:Medium and small open cooling towers
GB/T 8924-1988 Test method for flammability characteristics of glass fiber reinforced plastics using the oxygen index method
GB/T 8924-2005 Test method for flammability characteristics of fiber reinforced plastics—Oxygen index method
GB/T 13912-2002 Metallic coatings—Hot dip galvanized coatings on fabricated iron and steel articles—Specifications and test methods
GB/T 13912-2020 Metallic coatings—Hot dip galvanized coatings on fabricated iron and steel articles—Specifications and test methods
GB/T 31539-2015 Pultruded fiber reinforced polymer composites structural profiles
HJ706-2014 Environmental Noise Monitoring Technical Specification: Correction of Noise Measurements Using the Value of Noise Measurements
JB/T 7658.5-2006 Refrigeration equipment for ammonia - Part 5: Evaporative condenser (for use in ammonia refrigeration equipment)
HJ 706-2014 Environmental Noise Monitoring Technical Specification: Correction of Noise Measurements Based on Measurement Values
JB/T 7658.5-1995 Evaporative condenser used in ammonia refrigeration equipment
GB/T 151-2026 Heat exchangers
GB/Z 151-2026 Fire prevention measures on converters for high-voltage direct current(HVDC)systems,static var compensators(SVC)and flexible AC transmission systems(FACTS)and their valve halls
Related Standards
GB/T 3139-1982
Replaced
GB/T 3139-1982 Test method for thermal conductivity of glassfiber reinforced plastics
GB/T 3854-1983
Replaced
GB/T 3854-1983 Test method for hardness of fiber reinforced plastics by means of a Barcol impressor
GB/T 3855-1983
Replaced
GB/T 3855-1983 Test method for resin content of carbon fiber reinforced plastics
GB/T 3856-1983
Replaced
GB/T 3856-1983 Test method for compression properties of unidirectional fiber reinforced plastics
GB/T 6011-1985
Replaced