GB/T 33540.2-2017 Active National standards

GB/T 33540.2-2017 Lubricants for wind turbine—Part 2:Open gear greases

GB/T 33540.2-2017 Lubricants for wind turbine—Part 2:Open gear greases

Publish Date: 2017-03-09 Implement Date: 2017-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 33540.2-2017

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Synthetic grease

ICS Name: Lubricants, industrial oils, and related products

Publish Date: 2017-03-09

Implement Date: 2017-10-01

Pages: 9 pages

Scope

This part of GB/T 33540 specifies the product types and markings, requirements and test methods, inspection rules, labeling, packaging, transportation, and storage of special lubricating grease for open gears of wind turbines. This part is applicable to the lubrication of open gears in the yaw system and pitch adjustment system of wind turbines. The operating temperature range is -40 ℃ to 120 ℃.

Development Information

Word Count: 16 Thousand words Pages: 9 pages

Same series standard

GB/T 33540.1-2017 Lubricants for wind turbine—Part 1:Bearing greases GB/T 33540.3-2017 Lubricants for wind turbine—Part 3:Gear oils GB/T 33540.4-2017 Lubricants for wind turbine—Part 4:Hydraulic oils

Referenced Standards

GB/T 7631.1-2008 Lubricants,industrial oils and related products(class L)—Classification—Part 1:General SH 0004 SH/T 0081 SH/T 0202 SH/T 0204 SH/T 0229 SH/T 0331 GB/T 269-1991 Lubricating grease and petrolatum—Determination of cone penetration GB/T 269-2023 Determination of cone penetration of lubricating greases and petrolatum GB/T 678-2002 Chemical reagent—Ethanol GB/T 678-2023 Chemical reagent—Ethanol GB/T 2361-1992 Rust preventing oils and greases—Test method of wet heat GB/T 4929-1985 Lubricating grease—Determination of dropping point GB/T 5018-1985 Standard test method for corrosion preventive properties of lubricating greases GB/T 5018-2008 Standard test method for determining corrosion preventive properties of lubricating greases GB/T 7325-1987 Petroleum products—Lubricating greases and oils—Determination of evaporation loss GB/T 7326-1987 Lubricating grease—Corrosiveness to copper—Copper strip test SH/T 0700-2000 Determination of rust-prevention characteristics of lubricating greases NB/SH/T 0203-2014 Determination of Lubricant Loadbearing Capacity - Timken Method SH/T 0048-1991 Lubricating grease similarity viscosity measurement method SH 0164-1992 Rules for packaging, storage, transportation, and acceptance of petroleum products SH/T 0218-1993 Preparation method for rust-preventive grease test specimens SH/T 0218-1992 Sh/T 0218-1992 Rust-preventive grease test sample preparation method

Related Standards

GB 440-1977 Active

GB 440-1977 Aviation lubricating oil No.20

Publish Date: 1977-11-30

GB/T 3142-1982 Replaced

GB/T 3142-1982 Lubricants—Determination of load-carrying capacity (four balls method)

Publish Date: 1982-07-20

GB/T 3498-1983 Replaced

GB/T 3498-1983 Lubricating greases—Determination of dropping point (wide temperature range)

Publish Date: 1983-03-31

GB/T 4929-1985 Active

GB/T 4929-1985 Lubricating grease—Determination of dropping point

Publish Date: 1985-02-06

GB/T 5018-1985 Replaced

GB/T 5018-1985 Standard test method for corrosion preventive properties of lubricating greases

Publish Date: 1985-03-26

GB/T 6144-1985 Replaced

GB/T 6144-1985 Synthetic cutting fluids

Publish Date: 1985-06-20