GB/T 13575.2-2008 Replaced National standards

GB/T 13575.2-2008 Classical and Narrow V-belt drives—Part 2:Effective system

GB/T 13575.2-2008 Classical and Narrow V-belt drives—Part 2:Effective system

Publish Date: 2008-08-25 Implement Date: 2009-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 13575.2-2008

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Chain drive, belt drive, and key connection

ICS Name: Belt drive and its components

Publish Date: 2008-08-25

Implement Date: 2009-03-01

Pages: 23 pages

Scope

This section specifies the main dimensions, limit deviations, and technical requirements of narrow V-belt drive pulleys and belts according to the effective width system, as well as drive design methods and the installation and use of drive devices. It is applicable to general industrial V-belt drives. The appendix of this section specifies the basic characteristics of ordinary V-belt pulleys used in tandem with grooves of types AJ, BJ, CJ, and DJ according to the effective width system, including the dimensions of the pulley groove cross-section, the effective diameter of the pulley, and the geometric inspection of the groove. It is applicable to general industrial power transmissions. Multi-groove pulleys cannot be used in conjunction with tandem V-belts.

Development Information

Word Count: 41 Thousand words Pages: 23 pages

Same series standard

GB/T 13575.1-2008 Classical and narrow V-belt drives—Part 1:System based on datum width

Replace the following standards

GB/T 13575.2-1992 Belt drives—Narrow V-belt drives GB/T 17197-1997 Belt drives—Grooved pulleys for joined classical V-belts (effective system)

Superseded by the following standards

GB/T 13575.2-2022 Classical and narrow V-belt drives—Part 2:Effective system

Referenced Standards

GB/T 11356.2-1997 Belt drives—Pulleys for classical and narrow V-belts drives(system based on effective width)—Geometrical inspection of grooves GB/T 10413-2002 Grooved pulleys for Narrow V-belts(system based on effective width) GB/T 11357-1989 Quality, Surface roughness and balance of transmission pulleys GB/T 11357-2008 Quality,roughness and balance of transmission pulleys GB/T 11357-2020 Quality, roughness and balance of transmission pulleys GB/T 11544-1997 Classical and narrow V-belts—Dimensions GB/T 11544-2012 Belt drives—Classical and narrow V-belts—Dimensions(system based on datum width) GB/T 15531-1995 Belt drives—Pulleys—Limiting values for adjustment of centres GB/T 15531-2008 Belt drives—Pulleys—Limiting values for adjustment of centres GB/T 15531-2022 Belt drives—Pulleys—Limiting values for adjustment of centres GB/T 10413-2025 Belt drives—Grooved pulleys for narrow V-belts(system based on effective width)

Adopt standards

ISO 5291:1993

Related Standards

GB/T 6931.1-1986 Replaced

GB/T 6931.1-1986 Drives using belt—Basic terminology

Publish Date: 1986-08-11

GB/T 6931.2-1986 Replaced

GB/T 6931.2-1986 Drives using V-belts and grooved pulleys—Terminology

Publish Date: 1986-08-11

GB/T 6931.3-1986 Replaced

GB/T 6931.3-1986 Synchronous belt drives—Terminology

Publish Date: 1986-08-11

GB/T 11616-1989 Replaced

GB/T 11616-1989 Synchronous belts—Dimensions

Publish Date: 1989-03-31

GB/T 12735-1991 Replaced

GB/T 12735-1991 Fatigue test method for agricultural V-belts

Publish Date: 1991-02-12

GB/T 13490-1992 Replaced

GB/T 13490-1992 V-belts—Uniformity of belts—Centre distance variation—Specification and test method

Publish Date: 1992-06-09