GB/T 13575.1-2008 Replaced National standards

GB/T 13575.1-2008 Classical and narrow V-belt drives—Part 1:System based on datum width

GB/T 13575.1-2008 Classical and narrow V-belt drives—Part 1:System based on datum width

Publish Date: 2008-08-25 Implement Date: 2009-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 13575.1-2008

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Chain drive, belt drive, and key connection

ICS Name: Belt drive and its components

Publish Date: 2008-08-25

Implement Date: 2009-03-01

Pages: 28 pages

Scope

This section specifies the design method of common V-belts and narrow V-belts under the reference width system, as well as the installation and use of drive devices according to the reference width system. This section is applicable to general industrial V-belt drives. Pulleys specifically designed for ordinary V-belts cannot be used with narrow V-belts, and multi-groove pulleys designed for single V-belts cannot be used with bundled V-belts.

Development Information

Word Count: 51 Thousand words Pages: 28 pages

Same series standard

GB/T 13575.2-2008 Classical and Narrow V-belt drives—Part 2:Effective system

Replace the following standards

GB/T 13575.1-1992 Belt drives—Classical V-belt drives

Superseded by the following standards

GB/T 13575.1-2022 Classical and narrow V-belt drives—Part 1:System based on datum width

Referenced Standards

GB/T 1171-1996 Classical V-belts for general use GB/T 1171-2006 Classical V-belt for general drive GB/T 1171-2017 Classical V-belt for general drive GB/T 10412-2002 Grooved pulleys for classical and narrow V-belts (system based on datum width) GB/T 11356.1-1997 Belt drives—Pulleys for classical and narrow V-belts drives(system based on datum width)—Geometrical inspection of grooves GB/T 11356.1-2008 Belt drives—Pulleys for V-belts (system based on datum width)—Geometrical inspection of grooves GB/T 11357-1989 Quality, Surface roughness and balance of transmission pulleys GB/T 11357-2008 Quality,roughness and balance of transmission pulleys GB/T 11357-2020 Quality, roughness and balance of transmission pulleys GB/T 11544-1997 Classical and narrow V-belts—Dimensions GB/T 11544-2012 Belt drives—Classical and narrow V-belts—Dimensions(system based on datum width) GB/T 15531-1995 Belt drives—Pulleys—Limiting values for adjustment of centres GB/T 15531-2008 Belt drives—Pulleys—Limiting values for adjustment of centres GB/T 15531-2022 Belt drives—Pulleys—Limiting values for adjustment of centres GB/T 12730-2002 Narrow V-belt for general use GB/T 12730-2008 Narrow V-belt for general drive GB/T 12730-2018 Narrow V-belt for general drive GB/T 10412-2025 Belt drives—Grooved pulleys for classical and narrow V-belts(system based on datum width)

Adopt standards

ISO 4183:1995

Related Standards

GB/T 6931.1-1986 Replaced

GB/T 6931.1-1986 Drives using belt—Basic terminology

Publish Date: 1986-08-11

GB/T 6931.2-1986 Replaced

GB/T 6931.2-1986 Drives using V-belts and grooved pulleys—Terminology

Publish Date: 1986-08-11

GB/T 6931.3-1986 Replaced

GB/T 6931.3-1986 Synchronous belt drives—Terminology

Publish Date: 1986-08-11

GB/T 11616-1989 Replaced

GB/T 11616-1989 Synchronous belts—Dimensions

Publish Date: 1989-03-31

GB/T 12735-1991 Replaced

GB/T 12735-1991 Fatigue test method for agricultural V-belts

Publish Date: 1991-02-12

GB/T 13490-1992 Replaced

GB/T 13490-1992 V-belts—Uniformity of belts—Centre distance variation—Specification and test method

Publish Date: 1992-06-09